Home Forums Hunting & Shooting Gunsmithing Weatherby Recoil Pad

The pad on my 1991 Euromark needs replacement. Weatherby says they are glued on.

Anyone have any experience removing one of these?

Thank you.

Use a power mitre box with at least an 80 tooth blade. Tape the stock with painter's tape. Set the blade angle to 90 degrees and adjust the table to give you the same pitch as the original stock. Cut through the pad at the intersection with the stock taking a shaving off the wood as you cut. Install the new pad with screws.

Use braided fishing line to saw it off

Thanks for 2 helpful responses.