Home Forums Hunting & Shooting Hunter's Campfire Amazon carburetors

I need a replacement for my Honda Pressure Washer. I only need the jets and gaskets but I see whole assemblies on Amazon for a range of prices.
Any experience? Are they chit?

I bought a knockoff for my John deer riding mower for $11. Works great

I’ve had a couple. And have one on the way for my Briggs and Stratton mower engine. Never had any issues

I've bought a couple, weed eater and leaf blower. One lasted a season and the other is still going 3 years later. Mine were less than $20 so not much to loose. Plus they came with gas line and the bulb primer.

What's wrong with your jets?

For the money worth a shot once

I’ve bought the china replacements for weed eaters and got about a year out of them even with nonethonal or truefuel

Went through two china carbs for my Honda rancher until I finally bought an oem and haven’t had an issue since

I boogered one. Need a float bowl gasket now too...

16100-Z9L-811 for a Honda GCV170 powered pressure washer

Funny thing is you never know what your going to get. I bought a starter for my jeep at 1/2 the cost of an Oreillys or autozone rebuilt, turns out it was brand new made by a company in Arkansas not China.

Bought one for a sthil weed eater. Worked fine. Bought one for a Yamaha ATV. Never got it to work great but I robbed some parts off of it for a rebuild of the factory carb. For the money it’s worth a shot.

I've bought 3 over the years, all worked fine.

Yep. Buy a carb.

Go to ADvance Auto, after their ''OVERPRICES", EVERYTHING WILL BE A BARGAIN !!!!!!

BIL bought a couple pure junk

I've had decent luck with the clone carbs like that for the most part. I think they were better 10 years ago than they are now. I'm running a clone on my Stihl weed eater and I've replaced several for friends with no problems except once. If you really need it fixed, and they are cheap enough, I'd buy two just for good luck.

Bought one for my wood splitter. Been going strong the past two years

I’d love to tell you that China SheeT is garbage but they work great and are cheaper than the Carb kits

I can confirm that on dirt bike carbs from Amazon.

I think I'll buy a spare for my Generac XG4000, it has been hard to start lately. 22 bucks, not much risk to it.

I bought a rebuild kit for a Saw. cleaned the factory carb and left the Chinese carb in the box with the chinese piston. Used the ethanol resistant hoses and gaskets....

I've used a number of them. Like Hanco says, cheaper than a carb kit, and work just fine. In fact I usually get the tune up kit which has a bunch of extra parts, for a couple more bucks, and from which I might only use a part or two. But then save the unused parts along with the old carburetor for JIC.