Home Forums Hunting & Shooting Express Rifles and Big Bores Only Trijicon 1.25 & 375HH

Will the Trijicon 1.25-4 fit on a Win Mod. 70 crf 375HH with a standard Talley quick release set up?

why not?

It's an inch longer than a Leupold 1.5-5, so it should.

Longer overall or in the mounting distance? The Leupold does not have a front bell. I could not find the "mountable" distance for the Trijicon on their website or in their brochure.I am worried that it may not fit in Talleys on the long action.

A friend recently had some trouble fitting a Trigicon to a magnum action. It took some fiddling with offset rings to get it to fit.

I looked at their webpage yesterdat and it looked like a straight pipe. Maybe I looked at the wrong one. had a 30mm tube.

The answer from Trijicon

Sorry for the delay in the response.
In answer to your question about the TA21 mounting on you Winchester 70 375HH with Talley rings.
You may need to have a offset ring to mount that to your rifle. With a longer action rifle the distance between the scope rings may be greater than the space available on the Scope, due to the front bell of the scope.
This is why we came out with the TR24 1-4X24 w/ 30mm tube.
Un like the TR21, the TR24 is a straight tube. This allows the scope rings to be mounted at any distance available.
TR21G

TR24G