You didn't say what rifle you have chambered for this caliber, but you may want to check with the marlinowners.com/forums.
Do a search on a member named 35remington. He has done a wonderful workup on loads for the venerable Marlin 35rem. His principle thesis is that the SAAMI spec of 33k psi is light for the the Marlin lever 336 since the same rifle shoots the 30-30 at 42k+ psi. He mainly works at devloping loads for 180, 200 and 220 grain jacketed bullets in a tube mag rifle with a target of 2200fps.
If you have built up a vehicle for this caliber, then you may be willing to push his loads to a higher level.
BTW, your wish to get 2400+ fps out of the 200grain 35rem may be fanciful in anything short of a solid bolt or a high wall with new brass only.
Still you may get what your aiming for by using the Buffalo bore 35rem load in 220grain
2200fps out of a 20in barrel.
Hope this helps.