Home Forums Lever Action Central Lever Actions - General bore sighting a lever gun

I have a Bushnell bore sighter that works really great on my bolt guns but it will not fit on the barrel of my lever with the magazine tube. Do you guys have some way you bore sight your levers without going to the trouble of removing the bolt? Thanks

I dont understand.
I have a Bushnell Model 74-4001 "Standard Bor Sighter" that works fine on my lever guns.

This one is made in Taiwan but it does work.

Thanks Slim for the reply and hope you have a great Thanksgiving today. I don't know the mod number of mine, it's out in the safe but the barrel has to fit inside of the bore sighter so the stud can engage the bore and the barrel won't fit inside because of the magazine tube, hope this can be understood, maybe yours doesn't require the barrel to be inserted into the bore sighter. Have a great one.

It sure sounds to me like you are missing the arbors.
Go to Midway or the Midsouth Shooters Supply on-line catalogs and take a look at the pictures. Your bore sighter should have a knurled knob on the bottom and the arbor goes inside. The screw with the knob holds the arbor.
Did yours come in a roll up pouch?