Home Forums Gear Free Classifieds Gap rifle

GAP NON-Typical Hunter .308 win.
GAP custom Templar short action with fluted bolt and side bolt release.
Bell & Carlson GAP custom hunter stock OD splatter paint *Sunny Hill custom hinged floor plate.
Bartlein SS #3 countour 5R 1in11 twist (OAL 19.0)
Matte Black Cerakote finish on all metal work.
.
*The total weight with scope rings and bases is 8.4lbs.
shoots well under MOA

$2000.00 bare rifle (Scope and rings not included)

[img:center]http://[/img]

[img:center]http://[/img]

[img:center]http://[/img]

[img:center]http://[/img]

What is the LOP?

im not really sure on how to measure it thats why i layed the tape measure in the pic

I think it's around 12". I thought about buying it earlier. The original owner had it built for his daughter.

You can hook the tape on the pad and measure to the trigger.

Nice rifle.

You can measure the LOP with your tape, as it is the distance from the trigger face to the rear edge of the buttpad. I'd likely just pull the tape straight back to the middle of the pad.

Looks like 13.5" to me.

from the front of the trigger face to the middle of the butpad is 13.5 inches

When I move the white line and overlay it on the measuring tape I get well less than 13". The original owner listed it at 12.25". Has it been lengthened?

it was asked through PM what i would take for the pacakage.

2500.00 for the whole boat---rifle scope etc...

no it has not been lengthened those pics were taken today

Are you looking for any trades/ partial trades?

So you are representing that the LOP is 13.5"? I get the feeling you are being evasive. Why not take a pic with the measuring tape pictured as it should be to measure LOP?

if i were being evasive i would not have layed the measuring tape down next to the gun. I take that as an insult ------- and if yout think im beinbg evasive then dont buy the gun =====NEXT,,,

Hey CINCH was lookin to refurb the gun fund but let me know what you have trade wise

Here's why I think you are being evasive

1 - you stated that you were not sure how to measure LOP. You can't be serious.

2 - you did not position the measuring tape in a manner to accurately determine LOP

3 - you did not answer my question. Are you representing that the rifle has a 13.5" LOP?

4 - here is your quote from when you listed the rifle the first time.



5 - you stated that the stock has not been modified. Below is the listing as produced by the original owner of the rifle. He states that the LOP is 12.25" and also stated in the posting that the rifle was built for his daughter (hence the short LOP)

here is what i said on this post

from the front of the trigger face to the middle of the butpad is 13.5 inches

when i quoted the 12.25 it is waht the old owner told me then I was told to measure it a different way, It seems that there are a couple of different ways to measure . and as i quoted before Im not really sure how to measure the LOP....... look in the trhead and another member said 13.5 as well......................and to be quite honest with you the stock is a bell an carlson stock...if you dont like it replace it,,,,,,

what i am representing is whats in the pics in my post

man i really hope you never try and sell something on here and I was actually taking into consideration buying your 270 that been sitting on the boards. NOT



any way I hope you have a good night.

Thanks

NEXT

Evasive is an understatement..............

While this isn't perfect, it's ballparkish...



I'm coming up with 13".

I got 12.75". Its somewhere in that ball park.

SKANE that for that.........I just measured it as SKANE did and it it comes up 12.9 inches almost at 13