|
|
Joined: Mar 2004
Posts: 363
Campfire Member
|
OP
Campfire Member
Joined: Mar 2004
Posts: 363 |
I have a barrel for a Mohawk 48 Rem that is about 28 inches and cylinder bore. It is not doing me any good. I have been thinking for a while now about converting an old 48 to an HD gun. I want to cut it to 20 inches. I do some gunsmithing at home, but have never tried to cut a barrel. I have always paid for that service. This time, I want to try it myself. What is the best way to cut a barrel. Thanks for any help.
Principle Above All Else
|
|
|
|
Joined: Aug 2003
Posts: 10,262
Campfire Outfitter
|
Campfire Outfitter
Joined: Aug 2003
Posts: 10,262 |
hack saw..for HD it wont matter if it's not perfect,
|
|
|
|
Joined: Jul 2003
Posts: 629
Campfire Regular
|
Campfire Regular
Joined: Jul 2003
Posts: 629 |
A PIPE CUTTER will give you a clean cut.You can knock the edege off with a file.
Doug Burche Gun coating with Dyna Coat and CeraKote Dyna Bore Coat,Because barrel cleaning SUCKS. www.dynamicfinishes.com
|
|
|
|
Joined: Jun 2001
Posts: 32,151 Likes: 4
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Jun 2001
Posts: 32,151 Likes: 4 |
Ditto above, for your specs. Hacksaw, file, square, and emery cloth or sandpaper. Or pipe-cutter and emery cloth/sandpaper.
Maybe a bit of cold blueing.
The only true cost of having a dog is its death.
|
|
|
|
Joined: Mar 2003
Posts: 33
Campfire Greenhorn
|
Campfire Greenhorn
Joined: Mar 2003
Posts: 33 |
Remember 18" measured from bolt face is legal minimum. I have had game warden measure from front of receiver(He measured 16 1/2")! Took a while to sort out that mess!
"Make chips, Not sparks"
|
|
|
|
Joined: Jan 2003
Posts: 1,666
Campfire Regular
|
Campfire Regular
Joined: Jan 2003
Posts: 1,666 |
pablo referenced a good point. while out in the field you may run into someone with some authoriy but is ignorant on how barrels are measured. although the procedure is imbedded in the statutes, life for you may be easier if you cut it ,measure from the front of the reciver ring and add a quarter inch. then you shouldn't have any problems.
|
|
|
|
406 members (17Fan, 10gaugemag, 1936M71, 1beaver_shooter, 16gage, 257_X_50, 48 invisible),
2,284
guests, and
1,143
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,743
Posts18,495,138
Members73,977
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|