|
Joined: Apr 2011
Posts: 4,865
Campfire Tracker
|
OP
Campfire Tracker
Joined: Apr 2011
Posts: 4,865 |
I thinking of having an unemployed friend build me a functional, basic reloading bench. I will be loading a variety of rounds from pistol, rifle and possibly shotgun.
What should I tell him for size, storage, height, work space...? I will be taking it with me if I ever move, so it must be light enough to move or take apart.
If you had to do it over again, what is and isn't essential?
I probably spend around $400 or so for supplies and labor.
For even when we were with you, we gave you this rule: "If a man will not work, he shall not eat."
2 Thessalonians 3:10
|
|
|
|
Joined: Jul 2007
Posts: 1,740
Campfire Regular
|
Campfire Regular
Joined: Jul 2007
Posts: 1,740 |
I can tell you rite now, if it were I in your shoes and considering spending $400 on materials and loading for several different guns, it's gonna be heavy. Especially if you store everything on/in the bench. But kudos to you for helping out a friend ! I built mine, 30x72, (2) 1/2" sheets of plywood ( just cause I go over-kill on the mounting surfaces). Mine is completely open underneath, no cabinets or drawers. I finished off by putting a 4 foot, 12" deep section of industrial shelving on the top. I have to say, I would have done things different in some areas. Here's a hint, I saw a VERY usuable, MUCH more compact metal Receiving Desk in one of our warehouses this week. Several good sized cubby holes on top. Plenty of drawers and work-surface area. And MUCH more compact than mine. Look some up on the net and see if you like those as a "go-by"
|
|
|
|
Joined: Feb 2006
Posts: 1,347 Likes: 8
Campfire Regular
|
Campfire Regular
Joined: Feb 2006
Posts: 1,347 Likes: 8 |
Many roads lead to Dublin, but here is what has worked well for me for fifteen years: I built it following these plans from the National Reloading Manufacturers Association: http://www.shotgunsportsmagazine.com/downloads/bench_plans.pdfThe bench is heavy and sturdy enough to work well, but when it needs to be moved, the major sections can be unbolted and are then quite manageable. You can find lots of other plans and comments by googling "nrma reloading bench."
Al
Spend your life wisely.
|
|
|
|
Joined: Nov 2005
Posts: 23,154 Likes: 6
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2005
Posts: 23,154 Likes: 6 |
If I were starting over I would build a free standing bench so I could set it in the middle of the room and have work stations all around it. I would also build it out of oak or maple with wedged through-tenons to hold it's sub-assemblies together for easy knockdown if it ever needed to be moved, yet still be solid/heavy enough to withstand serious work. The top I would do as I did on my current one: 3/4x2�x72"strips of maple glued together face-to-face to make a top 30" wide. (Think bowling alley or basketball court.)
"You can lead a man to logic, but you cannot make him think." Joe Harz "Always certain, often right." Keith McCafferty
|
|
|
|
Joined: Aug 2008
Posts: 874
Campfire Regular
|
Campfire Regular
Joined: Aug 2008
Posts: 874 |
I bought a metal router table from Rocker and added lockable wheels. Put 2ft. by 3ft. 1/2" thick baltic birch top. Mounted press and powder fill on opposite sides. There is a shelf on the bottom which houses a 6" high plastic bin for the rest of my reloading equipment. Powder ,primers, brass, and completed reloads kept in lockable metal storage cabinet. I can move it where I want and it is very stable when the wheels are locked. Keep it in closet and wheel it out when I an ready to reload. I have $170 dollars in this setup I assembled 5 years ago. Very pleased with it and the reloads I turn out. Buckfever1
|
|
|
|
Joined: May 2008
Posts: 16,540
Campfire Ranger
|
Campfire Ranger
Joined: May 2008
Posts: 16,540 |
If I were starting over I would build a free standing bench so I could set it in the middle of the room and have work stations all around it. I would also build it out of oak or maple with wedged through-tenons to hold it's sub-assemblies together for easy knockdown if it ever needed to be moved, yet still be solid/heavy enough to withstand serious work. The top I would do as I did on my current one: 3/4x2�x72"strips of maple glued together face-to-face to make a top 30" wide. (Think bowling alley or basketball court.) I'm liking everything about this post and especially the bolded sections. Love wedged through tenons!
The Chosin Few November to December 1950, Korea. I'm not one of the Chosin Few but no more remarkable group of Americans ever existed.
|
|
|
|
Joined: Mar 2006
Posts: 20,955 Likes: 3
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2006
Posts: 20,955 Likes: 3 |
I can tell you rite now, if it were I in your shoes and considering spending $400 on materials.......it's gonna be heavy. Mine is completely open underneath, no cabinets or drawers. These same points are of utmost importance to me too. I suggest you focus on building the bench top as stout as you can. I did so and then bought some relatively inexpensive but quite capable steel workbench legs from Grainger. They are tucked under the heavy top so as to be nearly unseen. The frame for the top is 2 ea 2''x2"x3/8" angle iron, 1/2x2" slat supports topped with a prefabbed Formica kitchen countertop from Lowes. It is very very stout and screwed to the wall. As suggested by others it is bolted together at every point & can be taken apart and moved easily. I would say the entire structure weighs around 250 lbs. It spans 8 ft with nothing underneath but the legs 8" inset from each end.
By the way, in case you missed it, Jeremiah was a bullfrog.
|
|
|
|
Joined: Apr 2011
Posts: 4,865
Campfire Tracker
|
OP
Campfire Tracker
Joined: Apr 2011
Posts: 4,865 |
I should be more precise about the weight.
My wife's grandfather made a workbench out of an old railroad car. It sits on our back porch. It took six men to get it from the truck to the porch.
I want something a couple of guys could reasonably handle. Since it will be in the basement, I don't want to pay more than a twelve pack of beer to move it.
For even when we were with you, we gave you this rule: "If a man will not work, he shall not eat."
2 Thessalonians 3:10
|
|
|
|
Joined: Feb 2006
Posts: 1,347 Likes: 8
Campfire Regular
|
Campfire Regular
Joined: Feb 2006
Posts: 1,347 Likes: 8 |
I should be more precise about the weight.
My wife's grandfather made a workbench out of an old railroad car. It sits on our back porch. It took six men to get it from the truck to the porch.
I want something a couple of guys could reasonably handle. Since it will be in the basement, I don't want to pay more than a twelve pack of beer to move it. Dess, I built mine, following the plans I linked above, in my garage. Then I single-handedly carried the components down into my basement and bolted the components together. When/if we move to another house, I will unbolt things and it will be easy to get upstairs. Also, if you study the plans, you will see that the 3/4" plywood top sits on a 2x6 on the front of the bench that has its long side horizontal. When the top is screwed to this, the front of the bench where the press is mounted is plenty strong. After all, the design is distributed by the National Reloader Manufacturers Association. One last point, this is a complete set of plans that you can give to the person who is building your bench, and he will find them easy to follow. After all, I did. But, as I started my first post, "Many roads lead to Dublin." Good luck in finding a set of plans that will meet your needs.
Al
Spend your life wisely.
|
|
|
|
Joined: Nov 2009
Posts: 1,561
Campfire Regular
|
Campfire Regular
Joined: Nov 2009
Posts: 1,561 |
Men ocassionaly stumble over the truth from time to time but, most pick themselves up and hurry off as if nothing happened. - Winston Churchill-
NRA Endowment Life Member
|
|
|
|
Joined: May 2008
Posts: 16,540
Campfire Ranger
|
Campfire Ranger
Joined: May 2008
Posts: 16,540 |
That is a superb bench there BD but you're a cabinetmaker too aren't you?
The tail vise, the dog holes, and the dust collector tell me you are.
Great bench, I love it.
The Chosin Few November to December 1950, Korea. I'm not one of the Chosin Few but no more remarkable group of Americans ever existed.
|
|
|
|
Joined: Apr 2011
Posts: 4,865
Campfire Tracker
|
OP
Campfire Tracker
Joined: Apr 2011
Posts: 4,865 |
That is a superb bench there BD but you're a cabinetmaker too aren't you?
The tail vise, the dog holes, and the dust collector tell me you are.
Great bench, I love it. I concur
For even when we were with you, we gave you this rule: "If a man will not work, he shall not eat."
2 Thessalonians 3:10
|
|
|
|
Joined: Feb 2006
Posts: 196
Campfire Member
|
Campfire Member
Joined: Feb 2006
Posts: 196 |
I built this for ~$200 material. It is hell bent for stout with the metal plates bridging the uprights where the presses are mounted.
|
|
|
|
Joined: Nov 2009
Posts: 1,561
Campfire Regular
|
Campfire Regular
Joined: Nov 2009
Posts: 1,561 |
That is a superb bench there BD but you're a cabinetmaker too aren't you?
The tail vise, the dog holes, and the dust collector tell me you are.
Great bench, I love it. That is a superb bench there BD but you're a cabinetmaker too aren't you?
The tail vise, the dog holes, and the dust collector tell me you are.
Great bench, I love it. I concur Thanks fellas, and yes, I are one, once in a while. Actually, I cut timber for a number of years. When the timber business went on it's azz with the spotted owl stuff, I was qualified to go off to school and get re-educated and trained as a Union Carpenter and then followed that up about 10 years later going through a couple of years in the Union Cabinetmakers apprenticeship. I subsequently earned my journeyman's ticket for both sides of my trade. I made the bench to do multiple duty from building furniture to gun stocks,reloading,and the occasional duck decoy thrown in just for fun.
Men ocassionaly stumble over the truth from time to time but, most pick themselves up and hurry off as if nothing happened. - Winston Churchill-
NRA Endowment Life Member
|
|
|
|
Joined: Nov 2009
Posts: 1,561
Campfire Regular
|
Campfire Regular
Joined: Nov 2009
Posts: 1,561 |
I built this for ~$200 material. It is hell bent for stout with the metal plates bridging the uprights where the presses are mounted. It looks hell bent for stout also, is it all steel construction? if so, I bet it takes more than a couple of fellas to move it. Great bench!!!!! BD
Men ocassionaly stumble over the truth from time to time but, most pick themselves up and hurry off as if nothing happened. - Winston Churchill-
NRA Endowment Life Member
|
|
|
|
Joined: Apr 2011
Posts: 4,865
Campfire Tracker
|
OP
Campfire Tracker
Joined: Apr 2011
Posts: 4,865 |
Many roads lead to Dublin, but here is what has worked well for me for fifteen years: I built it following these plans from the National Reloading Manufacturers Association: http://www.shotgunsportsmagazine.com/downloads/bench_plans.pdfThe bench is heavy and sturdy enough to work well, but when it needs to be moved, the major sections can be unbolted and are then quite manageable. You can find lots of other plans and comments by googling "nrma reloading bench." I took your advice and got the plans to my friend. He's excited for the work and is tweeking the plans a bit. Pictures to follow when he's done. Thanks!
For even when we were with you, we gave you this rule: "If a man will not work, he shall not eat."
2 Thessalonians 3:10
|
|
|
|
Joined: Feb 2006
Posts: 1,347 Likes: 8
Campfire Regular
|
Campfire Regular
Joined: Feb 2006
Posts: 1,347 Likes: 8 |
Dess,
There were some outstanding and super sturdy benches posted. I certainly hope you will be as happy with the plan from the NRMA as I have been for 15 years. It is well thought-out and does the job that most of us need done.
Best,
Al
Spend your life wisely.
|
|
|
|
537 members (10gaugeman, 01Foreman400, 1badf350, 10gaugemag, 160user, 1Longbow, 47 invisible),
2,362
guests, and
1,236
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,336
Posts18,526,767
Members74,031
|
Most Online11,491 Jul 7th, 2023
|
|
|
|