|
|
Joined: Nov 2004
Posts: 1,207
Campfire Regular
|
OP
Campfire Regular
Joined: Nov 2004
Posts: 1,207 |
When a gun is cerakoted is the bolt also coated?
|
|
|
|
Joined: Oct 2008
Posts: 7,821
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2008
Posts: 7,821 |
�Nothing is so permanent as a temporary government program." -- Milton Friedman
|
|
|
|
Joined: Nov 2004
Posts: 1,207
Campfire Regular
|
OP
Campfire Regular
Joined: Nov 2004
Posts: 1,207 |
Ok so is it normally done?
|
|
|
|
Joined: Jun 2006
Posts: 5,496
Campfire Tracker
|
Campfire Tracker
Joined: Jun 2006
Posts: 5,496 |
About half do and half don't. I usually don't have the bolt coated
1 and done
|
|
|
|
Joined: Oct 2011
Posts: 19
New Member
|
New Member
Joined: Oct 2011
Posts: 19 |
If you have a factory action Rem. Sav. etc. It's easy for the bolt to be done less wear on the paint. But custom actions have a much tighter fitting bolt, you either use less material or not cerakote it at all. Most custom bolts get painted.
|
|
|
|
Joined: Nov 2004
Posts: 1,207
Campfire Regular
|
OP
Campfire Regular
Joined: Nov 2004
Posts: 1,207 |
|
|
|
|
Joined: Oct 2011
Posts: 19
New Member
|
New Member
Joined: Oct 2011
Posts: 19 |
Your Tikka should be easy enough to paint. I've had Karl at Kampfeld customs paint my rifles. Customs and factory, he does a great job on them.
|
|
|
|
Joined: Nov 2004
Posts: 6,237
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2004
Posts: 6,237 |
Is Cerakote suitable for Aluminum?
I am almost done with an AR raw casting, and need to decide between anodizing, which I think also hardens the Aluminum and some other type of coating.
I like what i have heard about Cerakote, but I don't know if it is a good choice for this application.
Ignorance is not confined to uneducated people.
WHO IS JOHN GALT? LIBERTY!
|
|
|
|
Joined: Oct 2011
Posts: 19
New Member
|
New Member
Joined: Oct 2011
Posts: 19 |
Cerakote works very well on aluminum also.
|
|
|
|
Joined: Jun 2006
Posts: 5,496
Campfire Tracker
|
Campfire Tracker
Joined: Jun 2006
Posts: 5,496 |
I would leave the bolt alone on a Tikka, they are so dang smooth operating.
1 and done
|
|
|
|
Joined: Sep 2005
Posts: 1,392
Campfire Regular
|
Campfire Regular
Joined: Sep 2005
Posts: 1,392 |
I've coated a bunch of Tikka T3's. Go ahead and coat the bolt and handle. Mask off the bolt face and rear of the lugs. The bolt will work just as slick as it always has if your application is correct.
|
|
|
|
Joined: Nov 2011
Posts: 3,184
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2011
Posts: 3,184 |
Cerakote works very well on aluminum also. Do you need to remove the anodizing before Cerakote? or rough it up?or is it fine to coat the way it is? Aluminum trigger guards, sights, scope bases ect.
Want To Buy; Form die for a 7mm Mashburn Super. .284 Hornady AMax 162gr. .224 Hornady AMax 75gr. 22-250 bushing die Bushing die that will work with the 7mm Mashburn Super A couple Glock 42 380ACP mags
|
|
|
|
Joined: Oct 2011
Posts: 19
New Member
|
New Member
Joined: Oct 2011
Posts: 19 |
You don't have to remove the anodizing but it needs to be sand blasted to etch the surface. It can be hard to remove all the anodizing. A good rough it up will do just fine. Good luck.
|
|
|
|
Joined: Mar 2006
Posts: 558
Campfire Regular
|
Campfire Regular
Joined: Mar 2006
Posts: 558 |
If you have all the stuff already the Cerakote seems pretty easy to use. I just tore apart my Finnbear and am re-coating it with the Air Dry Cerakote. However, the price that guys like Eddie charge is peanuts compared to the time and expense a guy like me is going through. I am not coating the bolt body, just the handle and the shroud.
It's not the destination...
|
|
|
|
507 members (12344mag, 1minute, 10gaugemag, 2500HD, 270cowboy, 10gaugeman, 48 invisible),
1,801
guests, and
1,259
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,054
Posts18,521,335
Members74,023
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|