|
|
Joined: Oct 2011
Posts: 159
Campfire Member
|
OP
Campfire Member
Joined: Oct 2011
Posts: 159 |
just wandering, if i can take any old 45 slug, put it in a sabot, ram it in and go to town as a cheap alternative to say powerbelts? not looking for MOA accuracy but if it is safe, is it too much to ask for baseball-at-50yards-accuracy? is there something im missing here?
"8mm rem mag, reach out n' touch something"
"Those who say the .223 is weak probably have never heard of the "meat grinder".
SEMPER FI
Head practical joke coordinator of the turd-like people (aka the chitmonks)
|
|
|
|
Joined: Dec 2007
Posts: 5,513
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2007
Posts: 5,513 |
If you are talking roughly equal weights and equal diameters then they will work fine.
Cast a little softer and with the correct loading you may find hey do everything you need for paper and meat.
Some spelling errors can be corrected by a vowel movement. ~ MOLON LABE ~
|
|
|
|
Joined: Sep 2009
Posts: 185
Campfire Member
|
Campfire Member
Joined: Sep 2009
Posts: 185 |
Are you talking .50 caliber guns piero? You can shoot any .451/.452 pistol bullet from 180 grains to 300 grains in a 50/45 sabot, whether the bullet is jacketed or lead or copper or steel. Lead bullets from pure soft lead to hard wheel weights are OK, though it's said that pure soft lead shot at high velocity will sometimes grow "ears" through the slits in the sabot. Regardless, there's no safety concerns at all with any of them. You can shoot .458 bullets made for the 45-70 in 250 grain to 500 grain in MMP orange sabots made for those bullets with no concern. In some guns with loose bores you can load the .458 bullets in 50/45 crush rib sabots.
Last edited by Semisane; 03/03/12.
My wife says I'm totally nuts, but I think I'm Semisane.
|
|
|
|
Joined: Dec 2009
Posts: 3,193
Campfire Tracker
|
Campfire Tracker
Joined: Dec 2009
Posts: 3,193 |
You may be pleasantly surprised by the accuracy of "any old slug" in your rifle. Assuming the you match the sabot to the bullet and bore diameter, cheap bulk bullets can shoot quite well. I have gotten great results with Remington bulk JHP's and Hornady XTP's in my rifles.
Life is like a purple antelope on a field of tuna fish...
|
|
|
|
Joined: Oct 2011
Posts: 159
Campfire Member
|
OP
Campfire Member
Joined: Oct 2011
Posts: 159 |
yes, i mean a .50, namely the cva elkhorn. came ※this※ close to buying one before i got my 30-30 for christmas. the only thing that put me off was that it seemed all the bullets that were recommended were like $1-2 per. but after hearing this i think i'll start saving again, which may not be long as they are going for well under $200 here. btw, i don't cast my own - yet, but that's still good advice as i didn't know that a bullet could deform from the sheer g's involves... anyway, thanks a lot, i've wanted to get into muzzleloading since i saw my first t/c - something, i think it was buckmaster or woodsman or huntmaster - some kind of two-part name, ring any bells?
"8mm rem mag, reach out n' touch something"
"Those who say the .223 is weak probably have never heard of the "meat grinder".
SEMPER FI
Head practical joke coordinator of the turd-like people (aka the chitmonks)
|
|
|
|
65 members (35, 7mm_Loco, 6mmbrfan, 1_deuce, 338Rules, 7 invisible),
1,549
guests, and
866
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,193,450
Posts18,507,948
Members74,002
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|