|
Joined: Apr 2006
Posts: 1,005
Campfire Regular
|
OP
Campfire Regular
Joined: Apr 2006
Posts: 1,005 |
I have a Rem 700 in 30-06 that shoots 3"groups @100yds. It has the CDL stock and blue bbl. Bbl is floated and trigger breaks on 3.5#approx. I have tried several brands of ammo and bullet weights. I have not tried handloads. Hart rifles has an accuracy package for $300+. Anyone had this done? Did it help? Any other ideas.
|
|
|
|
Joined: Jun 2001
Posts: 10,783 Likes: 1
Campfire Outfitter
|
Campfire Outfitter
Joined: Jun 2001
Posts: 10,783 Likes: 1 |
Hill Country Rifles but I think it cost more? Handloads may or may not correct it, but if it is actually shooting 3 inch groups at 100 and your sure the scope is ok and stock screws are tight to correct poundage then I would look at bedding and barrel issues? Any Remington I have ever purchased has shot 1 1/2 or better with most shooting 1 inch or under! Hope this helps?
|
|
|
|
Joined: Jul 2007
Posts: 24,644 Likes: 1
Campfire Ranger
|
Campfire Ranger
Joined: Jul 2007
Posts: 24,644 Likes: 1 |
After the scope and rings confirmation, buy a new take-off barrel and send to Redneck for a retube.
WWP53D
|
|
|
|
Joined: Dec 2011
Posts: 10,972
Campfire Outfitter
|
Campfire Outfitter
Joined: Dec 2011
Posts: 10,972 |
First take a close look at scope,rings,stock fit,ammo,and barrel crown.Then if possible get someone who knows what to look for take a look with a bore scope.Any of these could fix the issue or tell you that a new barrel is in order.
|
|
|
|
Joined: Jan 2005
Posts: 57,485
Campfire Kahuna
|
Campfire Kahuna
Joined: Jan 2005
Posts: 57,485 |
300 is what a TOP line barrel will cost... then add a bit more of course to install.. before I"d spend 300 on a touch up job I"d have it rebarreled at the same time.
Assuming you've done all the other checks.
But often its simple as a recrown job for 25-75 bucks...
We can keep Larry Root and all his idiotic blabber and user names on here, but we can't get Ralph back..... Whiskey Tango Foxtrot, over....
|
|
|
|
Joined: Apr 2006
Posts: 1,005
Campfire Regular
|
OP
Campfire Regular
Joined: Apr 2006
Posts: 1,005 |
I had HCR do a rifle forme several yrs ago and was pleased. It now costs $595 and they only guarantee with one ammo. Thought I would try Hart. I will ck everything again before sending the rifle to Hart. Thanks for all the help.
Coach
|
|
|
|
Joined: Sep 2008
Posts: 15,549 Likes: 2
Campfire Ranger
|
Campfire Ranger
Joined: Sep 2008
Posts: 15,549 Likes: 2 |
Two different guys have mentioned the barrel crown as a possible issue/solution here. I don't know if a crown has ever given me trouble and am curious. Can someone explain what to look for, and maybe show pics of a problem - or cite a good article about how to diagnose crown issues?
NRA Member - Life, Benefactor, Patron
|
|
|
|
Joined: Nov 2004
Posts: 7,109
Campfire Tracker
|
Campfire Tracker
Joined: Nov 2004
Posts: 7,109 |
don't just send the gun off for a new barrel. that may not fix it. I had a remington I tried that with and after it got a new krieger barrel it shot the same and believe it or not the only load it shot well was the only one the other barrel shot well. finally sent the gun to greg tannel and another new barrel and now its finally fixed. bedding all the tricks never solved the issue before. you can see if a gunsmith has any ideas or sell it and get a tikka.
|
|
|
|
Joined: Mar 2004
Posts: 7,126
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2004
Posts: 7,126 |
Bbl is floated and trigger breaks on 3.5#approx.
OK, it's floated but you didn't mention if the receiver has been epoxy bedded? If the receiver is just screwed down bearing on the wood it would be the first thing to do. Get it bedded>
|
|
|
|
Joined: Oct 2010
Posts: 5,513
Campfire Tracker
|
Campfire Tracker
Joined: Oct 2010
Posts: 5,513 |
I've had 4 rifles accurized at HCR. It's expensive, but I've been pleased with the results.
Eric
|
|
|
|
Joined: Jul 2003
Posts: 5,749
Campfire Tracker
|
Campfire Tracker
Joined: Jul 2003
Posts: 5,749 |
Try some Sierra 165 gr. BTHP Gamekings, 58 gr. of H4350, Fed 210 primer.
If it will not shoot that load...you have issues.
|
|
|
|
Joined: May 2010
Posts: 432
Campfire Member
|
Campfire Member
Joined: May 2010
Posts: 432 |
Old Coach,
If you are talking about RW Hart, I have not used their factory rifle accuracy package. I have had two rifles built by them on Rem700 actions. I have been happy with both builds.
|
|
|
|
Joined: Mar 2001
Posts: 18,881
Campfire Ranger
|
Campfire Ranger
Joined: Mar 2001
Posts: 18,881 |
I'd say that's not just off, but really off. Do you have rifles that shoot alot better in your hands ? If so, that's not the problem. Did you check the odvious, action screws, scope rings and mounts, etc. ? If so, that's not it. Did you try another scope ? That's where I'd look next. Then comes bedding, barrel crown, chamber ( the condition of the fired brass ?) You've tried several different loads. any of them "premium ammo" ? If so, I don't think handloads will do much for you. I'd run through the above before shipping it off for an accuracy job. E
|
|
|
|
Joined: Jul 2003
Posts: 5,749
Campfire Tracker
|
Campfire Tracker
Joined: Jul 2003
Posts: 5,749 |
I'd say that's not just off, but really off. Do you have rifles that shoot alot better in your hands ? If so, that's not the problem. Did you check the odvious, action screws, scope rings and mounts, etc. ? If so, that's not it. Did you try another scope ? That's where I'd look next. Then comes bedding, barrel crown, chamber ( the condition of the fired brass ?) You've tried several different loads. any of them "premium ammo" ? If so, I don't think handloads will do much for you. I'd run through the above before shipping it off for an accuracy job. E I'd have to agree with E here. Double check the fundamentals It has been my experience that it does not take much to get a Rem 700 to shoot. Often times, when one free-floats a barrel, one finds that the barreled action sits slightly lower in the stock. I've almost always had to remove some material from the front mounting screw. Is your front action screw touching your bolt lug? Even slightly?
|
|
|
|
589 members (12344mag, 10gaugemag, 160user, 22250rem, 10ring1, 007FJ, 64 invisible),
2,443
guests, and
1,313
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,203
Posts18,485,289
Members73,966
|
Most Online11,491 Jul 7th, 2023
|
|
|
|