|
Joined: Aug 2003
Posts: 4,249
Campfire Tracker
|
Campfire Tracker
Joined: Aug 2003
Posts: 4,249 |
If I had a Rem 700 with a factory extractor I would leave it alone as they are very good extractors. Having said that if I came into a Rem 700 with a properly installed Sako or M-16 extractor I would be fine with it. I've used several different Rem 700s with both for decades. 163bc
|
|
|
|
Joined: Dec 2007
Posts: 16,155 Likes: 7
Campfire Ranger
|
Campfire Ranger
Joined: Dec 2007
Posts: 16,155 Likes: 7 |
If they're doing that with the Lapua, maybe they don't have full confidence in their "C" clip extractor.
Most likely there's not enough room for that arrangement in the bolt face....
|
|
|
|
Joined: Dec 2012
Posts: 431
Campfire Member
|
Campfire Member
Joined: Dec 2012
Posts: 431 |
If they're doing that with the Lapua, maybe they don't have full confidence in their "C" clip extractor.
Most likely there's not enough room for that arrangement in the bolt face.... That is exactly right - there is no room for the C clip extractor in the bolt face because the Lapua case head is so large.
|
|
|
|
Joined: Jun 2005
Posts: 27,500
Campfire Ranger
|
Campfire Ranger
Joined: Jun 2005
Posts: 27,500 |
If I had a Rem 700 with a factory extractor I would leave it alone as they are very good extractors. 163bc You are KIDDING, right? Very good extractors? More like the sorriest extractors ever foisted onto the American gun buying public.
LOVE God, LOVE your family, LOVE your country, LIKE guns and sports.
About 2016 team "R" candidates "We definitely need a crew with a sack of balls the size of hot water bottles, bloviated estrogen leaking feel-gooders need not apply." Gunner 500
|
|
|
|
Joined: Jun 2005
Posts: 27,500
Campfire Ranger
|
Campfire Ranger
Joined: Jun 2005
Posts: 27,500 |
If they're doing that with the Lapua, maybe they don't have full confidence in their "C" clip extractor.
Most likely there's not enough room for that arrangement in the bolt face.... That is exactly right - there is no room for the C clip extractor in the bolt face because the Lapua case head is so large. I just looked over a 7.62 Warbird that a gunsmith friend built on a model 700 and this is, of course, correct. In his case the Sako Extractor was used and the first owner shot a pile of STUPID hot loads through it including some 150gr loads that ran 4,000 fps but required a hammer to open the bolt and made the cases look a reverse image of the bolt face! (Young moron that just loaded the book max loads and wanted his money back for the rifle when those max loads stuck in the chamber all the time. My gunsmith buddy happily re purchased the rifle to get rid if this idiot and get that ticking time bomb out of his hands!) The newly modified bolt, with Sako extractor, handled a steady dose of (literally) brass melting, primer popping overloads with no difficulty. Gives me much hope for the conversion and I have offered to trade him out of the rifle. I have a CETME being shipped to his house that, if he likes it and wants it, might become a custom 7.62 Warbird with a Pac Nor barrel etc.
LOVE God, LOVE your family, LOVE your country, LIKE guns and sports.
About 2016 team "R" candidates "We definitely need a crew with a sack of balls the size of hot water bottles, bloviated estrogen leaking feel-gooders need not apply." Gunner 500
|
|
|
|
Joined: Mar 2002
Posts: 9,130
Campfire Outfitter
|
Campfire Outfitter
Joined: Mar 2002
Posts: 9,130 |
I'll take the safety factor of a factory 700 over the possibly better more reliable extraction of the Sako just because I value my saftey, I have a few customs with Sakos and they work fine but not any better than my factory 700's which I have never had an issue with....... but I have never tried to achieve 30-378 velocity out of my 30-30!
|
|
|
|
Joined: Jan 2006
Posts: 18,453
Campfire Ranger
|
Campfire Ranger
Joined: Jan 2006
Posts: 18,453 |
I'll take the safety factor of a factory 700 over the possibly better more reliable extraction of the Sako just because I value my saftey, I have a few customs with Sakos and they work fine but not any better than my factory 700's which I have never had an issue with....... but I have never tried to achieve 30-378 velocity out of my 30-30! Exactly. Never really understood guys trying to turn their 30/06 into a 300 Mag especially when most of them owned several guns anyway. Besides, anytime I tried to boost velocity by hot rodding a load, it usually shot like crap anyway.
|
|
|
|
687 members (160user, 16gage, 12344mag, 10ring1, 16penny, 1beaver_shooter, 65 invisible),
3,008
guests, and
1,384
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,617
Posts18,492,642
Members73,972
|
Most Online11,491 Jul 7th, 2023
|
|
|
|