I have about 500 pieces of 308 brass that I fired out of my Sako. Never reloaded and thinking about trying and looking at the Classic Lee loader for that caliber. Any reason not to for a starter outfit? On-line reviews are good and do highlight the limitations.
I started with and still use the anniversary kit. Only original piece I still have is the press. And it still shucks out loads for my .270 that are 5/8" @100..5 shot groups
The Lee Loader works very well, in fact it often loads more accurate ammo than a press and conventional dies, because the neck is sized precisely in line with the case body, and bullets are seated very straightly. The smallest groups I've ever fired out of my Ruger No. 1 .22 Hornet were with reloads put together on a Lee Loader.
“Montana seems to me to be what a small boy would think Texas is like from hearing Texans.” John Steinbeck
1) Wear eye protection 2) Wear ear protection 3) Wear a light glove on the hand holding the case as you gently tap it over the primer...
Your hand should not be touching the case when priming if you're doing things by the directions. The case is tapped out of the sizing die onto the waiting primer. The priming rod fills the case neck, the sizing die encases the primer. Yes, the primers do snap sharply when the rare one pops, but it is a very safe operation. (I hold the rod just above the top of the die when priming, so I can feel the case move onto the primer without hammering on it more than necessary.) A good Lexan-headed mallet makes a good Lee Loader accessory.
Sometimes, the air you 'let in'matters less than the air you 'let out'.
Not too many years ago, bench shooters were setting records with reloading tools quite like a Lee Loader. Even though I have presses to spare, I started my son out with a Lee Loader. You can't get more in-tough with the fundamentals of reloading any better than a Lee. I also got to see him when he was seating primers and popped one. It's not dangerous just startling.
Well, I just ordered a Lee Loader for the 308 and some 165 grain Sierra Gamekings. I now embark on the world of reloading. Looking for powder and primers locally.
Well, I just ordered a Lee Loader for the 308 and some 165 grain Sierra Gamekings. I now embark on the world of reloading. Looking for powder and primers locally.
Thanks for the help.
Good choice to start loading, but as you expand into a press, dies and other sundry items us reloaders think we need, don't sell or give away the Lee Loader set. You just might find it difficult to improve on the accuracy of the ammo produced by the Loader.
I continue to use the Loader's from time to time, especially in doing load work up at the range. The only change I made with the Loader is I don't pound with a hammer. Several years ago I picked up a nice, inexpensive arbor press.
Since the Lee Loader only neck sizes, make sure you don't try to use those reloads in any other rifle than the one that it was originally fired in. It may work... Or you may end up paying a smith to extract a stuck case. Don't ask how I know.
In addition to the Classic Lee Loader, I'd also suggest picking up a decent set of calipers and a scale to give you flexibility on working up loads.
“The Savage 99 Pocket Reference”. All models and variations of 1895’s, 1899’s and 99’s covered. Also dates, checkering, engraving.. Find at www.savagelevers.com
If you don't want to use a wooden or plastic hammer, you can do what roundoak has done. This arbor press is around $70. I think Midway has this model. It's a Bald Eagle BE1001 Mini Arbor Press. It's a small press that is easily transportable.