|
|
Joined: Aug 2010
Posts: 48,139 Likes: 12
Campfire 'Bwana
|
Campfire 'Bwana
Joined: Aug 2010
Posts: 48,139 Likes: 12 |
Here's a more recent group. Shot on Friday, same load of TAC and the 50gr Nosler BT. 4 shots, from the magazine, off the bench with a sandbag front rest; no rear rest. Leupold FXIII 6x42 competition scope. This group was rounds 74-77 through the rifle. I haven't cleaned the barrel yet, and don't intend to until I see accuracy begin to drop off. All in all I'm continuing to enjoy this rifle, with the exception of the very stiff bolt lift that makes the rifle hard to cycle quickly when shooting off-hand. If I decide to get rid of the rifle that will be the main factor driving the decision. Looking great, but I have to ask: Why no rear bag??
I try to stick with the basics, they do so well. Nothing fancy mind you, just plain jane will get it done with style. You want to see an animal drop right now? Shoot him in the ear hole. BSA MAGA
|
|
|
|
Joined: Feb 2006
Posts: 4,373
Campfire Tracker
|
Campfire Tracker
Joined: Feb 2006
Posts: 4,373 |
This is what I needed to see, a good report on the 223. Just purchased one myself. I have the same Burris rings and my scope will be a Leupold VX-III 2.5-8x36 Boone & Crocket reticle. A seller on gunbroker listed the 223 with a 8 twist. Will have to check my barrel.
Ken
|
|
|
|
Joined: Aug 2006
Posts: 13,000
Campfire Outfitter
|
OP
Campfire Outfitter
Joined: Aug 2006
Posts: 13,000 |
Here's a more recent group. Shot on Friday, same load of TAC and the 50gr Nosler BT. 4 shots, from the magazine, off the bench with a sandbag front rest; no rear rest. Leupold FXIII 6x42 competition scope. This group was rounds 74-77 through the rifle. I haven't cleaned the barrel yet, and don't intend to until I see accuracy begin to drop off. All in all I'm continuing to enjoy this rifle, with the exception of the very stiff bolt lift that makes the rifle hard to cycle quickly when shooting off-hand. If I decide to get rid of the rifle that will be the main factor driving the decision. Looking great, but I have to ask: Why no rear bag?? I try to keep bench shooting as realistic as possible. Usually I'd use a tight sling for support but the Ruger's forearm has too much flex so I used a front bag, similar to how I might use a hunting pack if shooting prone in the field.
|
|
|
|
Joined: Oct 2002
Posts: 13,469 Likes: 3
Campfire Outfitter
|
Campfire Outfitter
Joined: Oct 2002
Posts: 13,469 Likes: 3 |
The best way to handle flexible forearms is to glue the forend to the barrel using automotive silicon. I like black. You are then using the barrel to stiffen up the stock, the silicon being flexible dampens vibration a bit. Works perfectly with bipods though if you try the really tight sling shooting style it may cause your point of impact to get a bit lower. You can easily remove the silicon by sawing a piece of 12 pound test fishing line thru it. I reccomend cleaning, drying and putting a thin coat of polyurethane on the metal below the stock line first to remove any chance of rust developing and making it unnecessary to remove the stock for a long time.
Dog I rescued in January
|
|
|
|
Joined: Apr 2010
Posts: 1,702
Campfire Regular
|
Campfire Regular
Joined: Apr 2010
Posts: 1,702 |
I'll be getting my compact next week, probably gonna slap a Redfield Revolution 2-7x33 on it and use the stock rings and bases on it to keep with the cheap truck gun/kids first deer rifle philosophy, can't wait to get it up and running!
|
|
|
|
148 members (300_savage, 10gaugemag, 257_X_50, 29aholic, 1beaver_shooter, 1minute, 18 invisible),
1,634
guests, and
898
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,863
Posts18,497,203
Members73,979
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|