|
Joined: Jan 2006
Posts: 1,104
Campfire Regular
|
Campfire Regular
Joined: Jan 2006
Posts: 1,104 |
I think those canoe paddle stocks are the toughest that there are. And if they were not a tad too long for my LOP, and if I could get a Decelerator Pad with appropriate LOP; I would have no hesitation about them on my Rugers. That is one tuff-ass stock and I have no issues with its looks. The Hogue is a bit fat and maybe a tad too grippy for me. But, I do use them on 10/22's and when rainy I do appreciate them. I may see if the LOP can be cut to fit and Decelerator added to this one. The fat, I can live with but the grippy and being too long for me to shoulder quickly sucks for me. I have a growing collection of un-altered ones. The McMillans in my LOP, I certainly like. I also like the standard laminated ones (non-lop adjustable). I like the green color and checkering on the Guide Rifle. Quiet frankly, due to the wait time and cost, I am looking for other avenues than just the McMillans. Hell, I can choke down the cost, but the wait time is what it is. Too bad no one picked up the Pacific Research / Rim Rock manufacturing. That stock I Really like.
--------------------------------------------------------------- Will love to see how you get it set up when I make it back to the valley this winter. I have been playing "Barbie dolls" with mine and dressing it in a slimmed down Hogue, old canoe paddle stock, my son's McMillan and the factory wood "African" stock. [/quote]
Last edited by ldmay375; 07/19/14.
|
|
|
|
Joined: Oct 2002
Posts: 950
Campfire Regular
|
Campfire Regular
Joined: Oct 2002
Posts: 950 |
Here's my .416 Ruger and I'm very happy with it. Gary Goudy stocked it for me. As can be seen,it has no brake and it seems to me to recoil about like a lightweight, heavy loaded .375 H&H. I haven't shot anything with it yet so I guess I'll have to pay Phil a visit one of these days. It's the top rifle. TT c
|
|
|
|
Joined: Jan 2006
Posts: 1,104
Campfire Regular
|
Campfire Regular
Joined: Jan 2006
Posts: 1,104 |
That is a very fine looking 416 as is the other rifle. Mine are Alaskan utility grades, as are all of my rifles. But, I certainly do appreciate the beauty of the fine blue, wood, and checkering! Here's my .416 Ruger and I'm very happy with it. Gary Goudy stocked it for me. As can be seen,it has no brake and it seems to me to recoil about like a lightweight, heavy loaded .375 H&H. I haven't shot anything with it yet so I guess I'll have to pay Phil a visit one of these days. It's the top rifle. TT c
|
|
|
|
Joined: Jan 2008
Posts: 1,411
Campfire Regular
|
Campfire Regular
Joined: Jan 2008
Posts: 1,411 |
ID: Regarding the "grippiness" of the Hogue over molded stock, after a week in the dust of Zimbabwe, it all but disappeared. What I really like about it is how the rubber deadened the sound of twigs scraping the stock when "hoovering" 40 yards from a herd of nyati looking for a hard bossed bull. The metal pillars are a plus. If you do not like the rubber coating, take it off with a block plane like Phil Shoemaker has illustrated on another thread.
|
|
|
|
Joined: Dec 2002
Posts: 22,274
Campfire Ranger
|
Campfire Ranger
Joined: Dec 2002
Posts: 22,274 |
I guess my question would be do I want a Rigby, or a Ruger?
"...the designer of the .270 Ingwe cartridge!..."
|
|
|
|
Joined: Jan 2006
Posts: 1,104
Campfire Regular
|
Campfire Regular
Joined: Jan 2006
Posts: 1,104 |
I do agree that the sound deadening is a plus. I have replaced the Hogue's on my 2ea 375Rugers with fiberglass and the one on my son's. But, do have one in factory issue Hogue. My son began using this one as his hiking/4-wheeler rifle this year. His previous walk-about bush-rifle was a 45/70 guide rifle stainless and walnut with 430 to 460 grain hard cast bullets. He really likes the Marlin, but rifles take a pretty good beating under these conditions. And I suggested the Hogue stocked "spare", due to my opinion of at least theoretically higher reliability of the bolt over the lever and do not think the Alaskan would suffer from diminished looks or function. Anyways with all that said, his use of the over molded kindled my interest in the stock; as this thread did my interest in the 416 Ruger. Long story short, I am going to see if the Hogue LOP can be reduced a 1/4" with a Decelerator added. If so, add a low powered scope and call it good enough for now.
|
|
|
|
Joined: Jan 2012
Posts: 4,684 Likes: 5
Campfire Tracker
|
Campfire Tracker
Joined: Jan 2012
Posts: 4,684 Likes: 5 |
I still have a NIB 416 Alaskan in the safe if anyone is looking for one. $799 + $25 to ship.
Last edited by Biebs; 08/12/14.
|
|
|
|
Joined: Apr 2010
Posts: 486
Campfire Member
|
Campfire Member
Joined: Apr 2010
Posts: 486 |
I am going to see if the Hogue LOP can be reduced a 1/4" with a Decelerator added. If so, add a low powered scope and call it good enough for now. Yes it can be reduced. I called Hogue on this matter and they said they would reduce the LOP for $84.00. So it can be done.
Nothing like a Remington 700xcr.
|
|
|
|
Joined: Jun 2011
Posts: 283
Campfire Member
|
Campfire Member
Joined: Jun 2011
Posts: 283 |
TSQ, Im envious, those are two beautiful rifles.
precision is group shooting, accuracy is hitting your intended target.
|
|
|
|
Joined: Jan 2008
Posts: 1,411
Campfire Regular
|
Campfire Regular
Joined: Jan 2008
Posts: 1,411 |
ID: Look at the NECG receiver sight for Ruger 77 if you want to remove the scope for bear protection. Existing front sight is tall enough. A lot easier to dry out a bolt compared to a lever but lever is faster for multiple shots.
Last edited by bobmn; 08/13/14.
|
|
|
|
Joined: Jan 2006
Posts: 1,104
Campfire Regular
|
Campfire Regular
Joined: Jan 2006
Posts: 1,104 |
700xcr, Thanks for the info. I am going to see if the Hogue LOP can be reduced a 1/4" with a Decelerator added. If so, add a low powered scope and call it good enough for now. Yes it can be reduced. I called Hogue on this matter and they said they would reduce the LOP for $84.00. So it can be done.
|
|
|
|
Joined: Jan 2006
Posts: 1,104
Campfire Regular
|
Campfire Regular
Joined: Jan 2006
Posts: 1,104 |
bobmn, I do like levers and have 45/70's in a SS and a blued model, both with the barrels cut to 20". I have packed the blued model a few miles, the stainless not so much. Both have ghost ring type sights. And several years ago, when the eyes were younger; I was pretty fond of packing them around when hiking. But, I none-the-less feel more confident in the bolt. One reason is obviously familiarity. And the other is function due to the collection of vegetation debris finding its way into every possible place when pushing through brush. I have found no matter how much effort I put into protecting the actions from debris, it still finds its way to places it should not be. Alder/willow/spruce, leave/twig/bud bits, bark; fern pieces, grass seeds, etc/etc tend to wind up inside and in between areas of moving parts. To me the bolt is easier to clean of debris. The water issue is about guaranteed daily during moose season; and is to be expected any day/anytime. I keep the barrel taped, remove the bolt and ammo, wipe down for the night and expect the same each day. I have detachable mounts on pretty much all my rifles, even the slick barreled ones. But, have never removed a scope when hunting. I much prefer a low powered/wide field of view/ bold reticle scope to sights. Anything .338 and above, have either 1.1-4's, 1-6's, or 1.5-6's and I am comfortable with them in close cover. I consider bear encounters every time I am outdoors. Likely not to happen nor end in an unfavorable way, but is a possible. I usually hunt/camp alone, so I try not to be paranoid but do give serious consideration. The differing of circumstances, skills, and opinions, as to the ability multiple shots and/or even an accurate single shot in a surprise close range and hostile encounter; I will leave to others to debate. ID: Look at the NECG receiver sight for Ruger 77 if you want to remove the scope for bear protection. Existing front sight is tall enough. A lot easier to dry out a bolt compared to a lever but lever is faster for multiple shots.
Last edited by ldmay375; 08/13/14.
|
|
|
|
548 members (22kHornet, 25aught6, 280ACKIMP, 222ND, 270wsmnutt, 10Glocks, 66 invisible),
2,540
guests, and
1,273
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,194,380
Posts18,527,505
Members74,031
|
Most Online11,491 Jul 7th, 2023
|
|
|
|