Home Forums Hunting & Shooting Hunting Optics CZ-550 Euro stock-rings/bases

This will going on a new to me 9.3 x 62. The current ring/base, brand unknown, is quite high. It measures about .480 from the top of the receiver to the bottom of the scope ring. I will be using a scope with a 42mm objective. I'm sure Talley makes something that would work. Any other ideas? Thanks

I have been using Warne QD high rings on my ZKK 600. They are sturdy and return to zero reliably. The high is needed due to the extremely high bolt lift of the ZKK 600. The new CZ 550 might be different in that regard?

I had Burris rings on my CZ 550 9.3x62 and they worked well and were lower, and lighter, than the factory rings.

The Alaska Arms Medium QDs are perfect for mine.....as low as I could go and clear the bolt.....nicely sculpted rings that reliably return to zero....great personal service from owner.

I do have a set of Warne 30mm that I would sell cheap.

VernAK
Thanks for the heads up. I just recently learned of Alaska Arms. I'll give them a shout.

My CZ wears the Alaska Arms rings as well.
Also received great CS from the owner.

My CZ wears the Alaska Arms rings as well.
Also received great CS from the owner.

Call the owner....he's very knowledgeable and helpful.