|
|
Joined: Aug 2005
Posts: 1,741
Campfire Regular
|
OP
Campfire Regular
Joined: Aug 2005
Posts: 1,741 |
300 HH based, At least the 300 HH case fits, I do not have a 300 weatherby to try. Just picked it up and have begun the Quest for Parts and Data.
The anti American Constitutional party (Democrat). Wants to dismantle your rights, limiting every aspect of your constitutional rights. Death by 1000 cuts is the tactic. Each cut bleeds constitutional rights to control you. Control is the goal.
|
|
|
|
Joined: Aug 2005
Posts: 1,741
Campfire Regular
|
OP
Campfire Regular
Joined: Aug 2005
Posts: 1,741 |
A few data points. 300HH brass head spaces right at neck, shoulder junction. A #3031 Hornady 150gr touches lands at 3.600" OAL and has an OAL of 3.585" if I center the crimp groove in New Remington 300 HH brass. I have 2 fire forming loads sitting on the bench using the #3031 150gr Set into the lands .025" over a light 300HH starting load of H4350. This is a winter project so I'll get started After Elk season. Rifle is a Custom built on a Interarms Mark-X extra long action. Nice wood stock with good figure that needs refinished. Bolt was lost in a Estate malfunction, So I got it for a great price. Barrel is a 6 groove 26" Stainless. Super smooth finish inside and chamber. No smith markings. All info I find places this case at 300 Weatherby capacity + - a few grains. I have H1000, H4350, IMR7828 in good quantity's to work up a load. Bullets will be shorter profile hunting bullets. 180gr Protected Point Partition will be top of my list, then 165gr Ballistic tips. 165gr Hornadys might be tried.
The anti American Constitutional party (Democrat). Wants to dismantle your rights, limiting every aspect of your constitutional rights. Death by 1000 cuts is the tactic. Each cut bleeds constitutional rights to control you. Control is the goal.
|
|
|
|
Joined: Dec 2005
Posts: 1,579 Likes: 1
Campfire Regular
|
Campfire Regular
Joined: Dec 2005
Posts: 1,579 Likes: 1 |
I have a set of F.L. 300 H&H IMP 30%
part # 550100
It needs a decapping rod, do you need them?
Jim
I tend to use more than enough gun
|
|
|
|
Joined: Aug 2005
Posts: 1,741
Campfire Regular
|
OP
Campfire Regular
Joined: Aug 2005
Posts: 1,741 |
I will not know until I Fireform a Case. Which Ackley Die set I need. But If It turns out to be #550100 Or its current Part # I'll be very interested. I have multiple Decapping rods in .30 I can swap around. I'm Pretty sure it is RCBS Part # 56279 But I might be wrong.
The anti American Constitutional party (Democrat). Wants to dismantle your rights, limiting every aspect of your constitutional rights. Death by 1000 cuts is the tactic. Each cut bleeds constitutional rights to control you. Control is the goal.
|
|
|
|
620 members (007FJ, 160user, 1minute, 1beaver_shooter, 12344mag, 219DW, 67 invisible),
2,962
guests, and
1,270
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,482
Posts18,490,222
Members73,972
|
Most Online11,491 Jul 7th, 2023
|
|
|
|
|