Home Forums Gear Free Classifieds Case Annealing Holders (GA)

For sale are four adjustable cartridge case holder/heatsink prototypes that I built. They will allow you to use a drill to rotate the cartridge case neck area over a flame to soften and extend case life. The tool is adjustable for depth so you can precisely set how deep the case sets in the tool. The holders are very similar to the now discontinued Hornady holder except mine have an adjustable steam. The stem and lock nut are made from regular steal but the tool body is made from T6511 aluminum. I can also custom build you one for a little more. Prototypes are $10 each shipped plus $8 for each additional prototype, so $34 for all four. Custom built ones are $20 each shipped plus $15 for each additional custom made holder. I can do PayPal gifts or USPS Money Order

Please review how to anneal cases before using this tool. I take no responsibility or liability on how you use this tool or the results of your use.



Below you will find the specifications for each prototype that I built.

A.

Length – 2”
Bore – 0.5625”
Bore Depth – 1.75”

B.

Length – 2”
Bore – 0.500”
Bore Depth – 1.75”

C.

Length – 2”
Bore – 0.5625”
Bore Depth – 1.75”
Stud Size – 1/2” (all others use a 3/8” stud)

D.

Length – 2.5”
Bore - 0.625”
Bore Depth – 2”

Please message me with any questions.

Here are some samples of custom built holders. Note that the 50 BMG holder in last picture costs more.


[img]http://www.grahamweb.net/uploads/anneal/anneal-07.jpg[/img]
[img]http://www.grahamweb.net/uploads/anneal/anneal-08.jpg[/img]
[img]http://www.grahamweb.net/uploads/anneal/anneal-09.jpg[/img]
[img]http://www.grahamweb.net/uploads/anneal/anneal-10.jpg[/img]
[img]http://www.grahamweb.net/uploads/anneal/anneal-11.jpg[/img]
[img]http://www.grahamweb.net/uploads/anneal/anneal-12.jpg[/img]
[img]http://www.grahamweb.net/uploads/anneal/anneal-13.jpg[/img]

Very nicely done!

tig tog tag

?

He is marking it in his posts so he can find this thread later.

Very nice product!

Tag

Kewl!

Tag

A&D SPF

A, B, & D are gone.

Are you still making these

The OP was last Seen 03/25/19.