Home Forums Thread Like Summary - For chidts and giggles, tell me what I have

I found this a while back and thought it would be fun to let you guys pick it apart. The bore and chamber are in very good condition. I'll post some good pictures. Let me know what I have and what you think it's worth. Thanks guys!!

That's what I'm thinking too guys. I thought it was different at 22 inches, but not a short rifle barrel. Whoever re soldered the ramp on did a very good job. It looks factory to me. I wish I would have asked my smith friend about it when I was in Oregon. As far as stippling, sbrmike is correct. It should have been stippled. The ramp on this barrel appears to be one from 1955-'57. Termed #6 ramp, according to Rule. It is roughly 2 3/8" long and has 14 striations. I thought this barrel would be a good one for someone wanting to re bore or rechamber to a bigger caliber or cartridge, like a 35 Whelen or even a 358 Norma. It would be shorter and handier and also have more meat than a FWT barrel. Damn, beretzs here was talking about wanting to build a 35 Whelen... This may be a good barrel for that?