Originally Posted by FreeMe
Originally Posted by Triggernosis
Originally Posted by JefeMojado
What brand of primers are you using?, and are you seatings them firmly.
CCI. I primed them on the press, which I usually don't do - usually hand-prime. So I'm thinking that's likely the issue.

I did use a FCD.

I'm not going to do anything until I fire some more and I will pick out the ones that don't fire on the first strike and do some measuring and see how they are different than the others.

Do this, at least. Check all your loaded rounds' primers to see if any are not fully seated. If you can verify that they are, then you can eliminate that variable up front.
Just how stupid would it be to try to use my hand primer to seat them deeper? 🤣🤣🤣

Last edited by Triggernosis; 03/22/24.