Seafire,
Can you post data for the 50gr bullet out of a .22-250 please?
Thanks!
II. 50 grain Hornady SP, Win Large Rifle Primer
1. 7 grs: 1722 fps
2. 8 grs: 1911 fps
3. 9 grs: 2057 fps
4. 10 grs: 2206 fps
5. 11 grs: 2328 fps
6. 12 grs: 2473 fps
7. 13 grs: 2627 fps
8. 14 grs: 2729 fps
9. 15 grs: 2856 fps
10. 16 grs: 2940 fps
11. 17 grs: 3116 fps
12. 18 grs: 3181 fps
13. 19 grs: 3271 fps
14. 20 grs: 3354 fps
With this bullet, all the way to 20 grains was reached ( 60%). However, I would recommend max being set at 19 grains or less.
III Sierra 52 grain Hollow Point Match Win Large Pistol Primer
1. 7 grs: 1676 fps
2. 8 grs: 1841 fps
3. 9 grs: 1998 fps
4. 10 grs: 2127 fps
5. 11 grs: 2311 fps
6. 12 grs: 2416 fps
7. 13 grs: 2551 fps
8. 14 grs: No Read
9. 15 grs: 2795 fps
10. 16 grs: 2935 fps
11. 17 grs: 3029 fps
12. 18 grs: 3127 fps
13. 19 grs: 3252 fps
14. 20 grs: 3297 fps
This bullet also reached the 20 grains mark ( 60 %) . However once again I recommend max being set at 19 grains or less.
I've been shooting a load of 18.5 grains of Blue Dot in a 22.250 lately and it has proven to be quite the tack driver... another good thing about it, is that the brass does not even have to be resized frequently... I just deprime and then reprime and it is ready to go again.. doesn't even need neck resizing...
I am using this load as a test on stretching out brass life.. so far on 10 test batches of 10 cartridges each, several have hit the 20 reloads mark and are still going strong..
I am finding this will have an advantage when gone out of state on a prairie dog shooting trip if you can reload the cases without the need to neck size them even...they are averaging needing a neck size about every 5th shot only...