With a flooded saw you can take the plug out and pull the engine over several times. It will blow all the excess fuel out of the plug hole. Then turn the saw upside down and pull it over. Once it stops spewing, dry the plug off as best you can and reinstall it. Set the choke/ignition to the high idle position (all the way down, then 1 up) and pull 'till she fires. Saw will fire within 5-6 yanks 99% of the time.
And with the 025 and like saws, I'd do all the pulling/spewing with the air filter off to avoid it getting soaked with pre-mix.
Now I just have to get the idle adjusted. It will run fine but once you let off the gas it won't stay idling for long.
