Originally Posted by Mishka
Originally Posted by 4th_point


You stated that you're an expert with torque measurement devices and repeatedly quoted the ISO standard.

Let's see it.



Oops, forgot to reply to this one.

You got to be one of those dudes who like to make things up...

Yep, let's see it. Jason, go ahead and find my post stating "I'm an expert with torque measurement devices."

Why do you say all these things which never took place?

In regard to ISO standard - you did state that you work for ISO 9001 company. Do you guys over there sometimes quote (and possibly, sometimes use) ISO standards, to comply with ISO 9001 certification? Then, what is your problem with me quoting ISO standard, which is applicable to your initiative of testing torque tools?

I know you're not going to find any of my posts with statement that you've attributed to me, and I suspect you know nothing about ISO, so just drop all these attempts, and simply do testing of torque tools, as you've promised to do to some of forum members, in your own Jason's way.


Mishka,

You keep reiterating that you are "out of it" and will no longer respond to Jason's posts, yet, your posts directly follow Jason's posts at least 4 times after you said you would cease and desist that precise activity. The way I see it you have absolutely no grounds to criticize Jason's kind gesture to his fellow board members. Further, you should just shut the [bleep] up. You're not contributing anything to the thread topic; you've got some sort of problem with Jason and his offer to check our torque wrenches. If you must argue with him take it into a PM and keep the monkey poo-fights off of the public board.