Originally Posted by RJC58
Originally Posted by JoeBob
By the way, has anyone mentioned the 125 grain Sierra FNHP? You can load that sucker up to almost 2600 fps in the standard 20 inch carbine. It hits like a hammer and shoots about as flat as anything else out to 300.



Those are ballistics not too dissimilar to a 257 Roberts.


Not really. Not even close to what a Roberts can do.

Using the .30-30 load referenced and .257 Roberts +P velocities as chrono’d from my rifle, a comparison tells a very different story.

.30-30 = Sierra 125g FN/HP, BC .119 @ 2600fps, 20” carbine
.257 Bob = Swift 120g A-frame, BC .382 @ 2947fps, 22” barrel Ruger M77
.257 Bob = Nosler 110g AccuBond. BC .418 @ 2163fps, 22” barrel Ruger M77

Given 100 yard zeros and a 300 yard target:

Sierra 125g FN/HP = -33.5”, 1088fps, 329fpe
Swift 120g A-Frame = -12.0”, 2298fpe, 1534fpe
Nosler 110g AccuBond = -9.7”, 2538fps, 1573fpe

Love my .30-30 but for longer reach my Roberts wins every time. By a mile.


Coyote Hunter - NRA Patriot Life, NRA Whittington Center Life, GOA, DAD - and I VOTE!

No, I'm not a Ruger bigot - just an unabashed fan of their revolvers, M77's and #1's.

A good .30-06 is a 99% solution.