Won't the tip of a soldering iron in little screw heads help when breaking Loctite adhesion?
Yes. It doesn't take long to get the screw threads hot enough to melt the adhesive used, even using red loctite. But, don't let it cool before getting the screw out of the hole and the remaining loctite out of the hole and the screw because when it solidifies again it retains the adhesive property. All of the epoxies and the loctites are plastics.
* The blue loctite adhesive bond can be broken by hand. The red loctite needs to be melted.
** I haven't tried the colored nail polish to be a quick check to determine if the scope has slipped in the rings. I plan on doing that as well as putting it on the top of the screws after the screws are all installed and everything is plumb and level.
