Originally Posted by drover
Originally Posted by Higbean
Saw these at Shot today. Same inlet top and bottom as T3x. Bolt knob has an allen screw through it so will change out easily. 17hmr as well. Should be a great platform! Holding out for stainless.


Is the action length the same as the T-3 ? iIt is hard to tell from the pics, if so that is a lot of action length for a rimfire.

drover


The action on the rifle shown in the press pics is CONSIDERABLY shorter than a T3x action. In fact ,the action looks to be the same length as a Finnfire or Quad. Which makes sense being they are rimfires.

But ,as Higbean mentioned, there is an extension to the front reciever ring that continues under the barrel to allow the short rimfire action to use the standard Tikka T3X action inlet...See pic below-

[Linked Image]

Last edited by jk16; 01/25/18.