Zip Strip, Stripeez, Homer Formby; just about any chemical stripper will work. Remove it all and start from scratch. Don't use sandpaper to remove the finish. It may look like the stripper left some finish on (splotchy and white) but it will look good when new finish is applied, if necessary or wanted after stripping twice and not satisfied use steel wool, brass wool, a stainless pot scrubber or other 3M type pad. I can't believe I can't remember what those green pads are called!
Scotch Brite Pads!!! Better late than never!
Last edited by sbrmike; 05/15/19.
