My go to load in the past was Norma Brass, 250 gr. Accubonds, 58 gr. varget, Fed 210M primers and 3.290 OAL. I upped the last loads to 60 grains. The Nosler #7 manual shows 56.5 grains of Varget as max load,with 52.5 grs. of Varget shown as the most accurate load with the 250 Accubonds. It is seldom that I load over book max, but I did on the Sako, and had no problem with blown primers or stretched cases.




[Linked Image]

Sako 75 Hunter. Originally 30-06, re-bored to 9.3 x 62.

[Linked Image]

ya!

GWB


A Kill Artist. When I draw, I draw blood.