Home Forums Hunting & Shooting Single Shots Falling block action build along

Triggered.....

Triggers and sears installed in the housings. Next will be to install springs, adjustment and set screws. The triggers are adjustable for pull and seat engagement. The larger house in the housing is for viewing the sear/trigger engagement.

Also, the pivot point for the trigger is towards the rear. This reduces the amount of travel at the blade of the trigger, but amplifies the travel at the front. This reduces felt creep. The forces acting on the trigger from the mainspring to the sear are perpendicular to the pivot point of the trigger. Again, to reduce drag, creep and helps make the trigger more crisp