There is a cutout in front of where the bolt release button is located. Is this a single shot? Looks like the bottom is not cutout for the ammo. Its hard to tell in the photo, but it appears that the top of the action, where the holes are drilled, is lower than the left side of the action. The left side should be lower than the top of the action. Again, this could just be the angle that the pic was taken. After looking at this more, I believe the way the light shine off the left side makes an optical illusion. Looking at it one way, the left side looks high, another way and it looks correct.
The holes appear to be drilled in about the right place, assuming they are straight. The front hole does appear to be drilled all the way thru, but the rear hole doesn't. Hard to tell the way the light is. They should be drilled all the way thru.
Last edited by Oldman3; 08/17/19.
