www.tech-sights.com, look for the replacement front sight for Marlin lever guns. It is an M-16 style height adjustable with wing protection. One of their ghost rings might work for the rear. Then you will have the windage in the rear sight. If you shorten the barrel you will have to drill and tap anyway. I like to set them farther back from the muzzle than normal then you have room for a possible suppressor if it ever is needed. Even farther back and a reflex suppressor could be utilized. I have two sets of tech sights and will put one on a 7600 in the near future. Gooe luck and send us pictures of the setup you decide on. Mine will have a scout scope setup with rail so I can QD the scope on and off. If it is right I will also have a green dot sight with QD setup. Be Well. Rusty
