Going SA this time! What are the dimensions of the reamer? What bullet are you going to shoot this time?
The 1st go around, the 6 PRC was a switch barrel with the 6.5 barrel on a long action. This time it's 6 PRC all the way, so short it is.
Reamer spec is a .109" freebore, so about a 2.850" OAL in the lands 15-20 thou. I thought I could get by deep seating to 2.80", and run out of a factory box, but decided I didn't want to sink them that deep, and bought the Wyatts 6.5 PRC kit.
I may start with the 110 SMK again, as I still have a bunch. I struggled mightily with runout on my brass for the 1st barrel, so the learning curve, hopefully, will be considerably shorter this time.
