I'm going to ask another question. If you guys were reloading for the 376 did you have problems getting the powder low enough in the case to seat the bullet? Did you use a drop tube? I tried putting the load of IMR4895 in the case for a 235 gr. Speer Semispitzer. There was only about 1/8" left in the case. I poured the powder back into the can and came back for more research. TIA and Be Well, Rustyzipper.
Dropping the charge into the case, then touching the case rim to a vibrating tumbler for a few seconds will usually settle the powder charge a bit.
Okie John
