I am considering changing my brass preparation procedure.
What I have done for years is: lube with the RCBS pad and lube including inside the neck, size, trim deburr and chamfer, tumble and then wipe down brass. Special attention is made to clean the inside of the neck to make sure no lube or dust from the tumbling media remained.
What I am considering doing now is to remove the wipe down after the tumbling and to replace it with washing the brass in hot water and dish soap to remove the residue from tumbling, followed by a hot water rinse and air dry.
Is there any flaw in my thinking?
Thanks in advance for your responses.
George
