You'll need a body die to set back shoulders from time to time when neck sized cases get sorta hard to chamber.

Redding makes a good one, but I've found it cheaper to ream the neck on a Lee FL sizer. So, get the Deluxe set, make a body die out of the FL die and use the Collet neck sizer.

This one was a .22-250 Lee FL sizer, is now a .22-250 body die. Or you can go up a caliber (or two) for the same case, i.e. use a .260 FL sizer as a body die for a .243; the 6mm case neck will clear the 6.5mm die neck.

Those dies are really hard and I used a grinder. Had a Dremil grinding tip that was worn down enough to fit in the .224 neck. You have to work on it a while, cut enough die neck so it clears the case neck. I'm not a big fan of LEE FL sizers, some are better than others. This one's highest and best use is as a body die.

DF

[Linked Image from i.imgur.com]