HawkI:
They are sized OK. They are so big at the nose, (ogive) that it engraves the rifling in my rifle. I didn�t mould these bullets myself. I don�t have the mould.
Maybe they do have varying nose diameters. I can check on that. I was scratching, looking for a reason why some were tighter than others. I thought some might be mis-aligned.
As to the right mould, I bought some bullets from Oregon Trail, (Lazer Cast) that fit perfectly, but the alloy is too hard. I�m trying to find bullets suitable for hunting.
Thanks
Smitty of the North
Gnoahhh:
I didn�t mould these bullets myself. I dunno what kinda mould the guy used for them. It could have been a double cavity one for all I know. That might explain why some chambered harder than others. I've never heard of marking them that way, but it sounds like a good idea.
I can shoot these bullets, so they aren�t a waste. At this point I�m guessing they won�t be my final choice though.
Yeah, these forums are a big help, and I�m taking advantage of this one.
Thanks to all contributors. It gets interestinger, and interestinger.
Smitty of the North
