[/quote] Both... But I should add - first thing is to remove that hot glue crap that Win used for 'bedding' (assuming this is an untouched stock from the factory).. Then see how the action sits in the stock re: barrel channel.. If it's now centered, make sure there's no pressure point - especially near the fore-end tip.. Remove that. If it's still not centered then you'll have to remove a bit of barrel channel to keep the barrel from any contact. Then do a proper glass bed; I also ensure the bedding is included for the first 1-1.25" of the barrel shank..
[/quote]
Well, it reminded me of hot glue but I couldn't imagine anyone putting that mess in there!
