Originally Posted by rj308
Originally Posted by Overkill45
The Murphy is also tall so you just use low rings. .820 rings and the Murphy will clear upto a 44mm obj no problem with caps on it. Murphy is available in 17-4 SS and Titanium but they are also over $140 now. The Titanium is around $160 but they are excellent rails. 17-4 is stronger and more corrosion resistant that 416.


If you call Cameron Murphy, he will machine your rail to a lower height than what he lists. RJ


Ive talked to him. No need to do that though since .820" tall 30mm rings are not uncommon. Ive got 2 in rings this size with 44mm obj. The fit is very good on the Murphy rail. If you went with a 40mm obj you may want to do that but you can get rings well under .820" tall in 1inch. They probably will be Weaver spec rings though. I just dont care for Weaver rings on a picatinny rail. They normally work but if you are spending the coin on a top shelf rail then buy the good rings too. Seekins makes a short 1" ring but im pretty sure the cross bar is Weaver spec.