A quick 1000 words:

30 STW with 155 Skinner seated to max OEM L/A 700 COAL(which tends to average 3.685") on left of OEM 'box. 30 STW(full length H&H),next to a 7mm RemMag empty(which is a 2.5" H&H) on it's right. Boolits in ascending length to left of loaded 30 STW: .308" 155 Skinner,.284" 162 ELD,.284" 180 ELD and lastly .284" 190 A-Tip. Hint.

[Linked Image from imagizer.imageshack.com]

Now "throating" sounds fhuqking good,until you nestle schit in said confines with STW case length. HINT.

[Linked Image from imagizer.imageshack.com]

So if only to come full circle,the 7mm RemMag in OEM issued guise,is a tough NO Bullschit bitch to whoop. It'll Smooch,nestle and stabilize the 180 ELD at Low Tide. I'm ALWAYS happy to trade away case length and some capacity,to eek more BC. Which is why in a nutshell a 22-250AI/224 Speedmire STOMPS a Swift. Why a Seex Kreed STOMPS a 6mm Rem....yada,yada,yada. Bullets matter wayyyyyyyyy more than headstamps and you gotta align RPM,COAL and throat geometry to ring the bell. So for a STW or Ultra to play in like latitude,you'd need to increase COAL the .350" case length difference,from a 7mm RemMag,which would require a 4.035" COAL latitude mag box. Hint.

Pass the easy win and hold The Fhuqking Fluff. Hint.

You've been led to water....................


Brad says: "Can't fault Rick for his pity letting you back on the fire... but pity it was and remains. Nothing more, nothing less. A sad little man in a sad little dream."