Home Forums Hunting & Shooting AR and Tactical Rifles Forged, Cast, or Milled?

Print Thread

Hop To

Re: Forged, Cast, or Milled? Navarro #1716466 10/04/07
Joined: Sep 2007 Posts: 290 Michigan 5Rrifling Campfire Member
5Rrifling Campfire Member Joined: Sep 2007 Posts: 290 Michigan	Forged receivers are put into a CNC to finish..then you have those that start out as a block of Billet and is CNC'd to a receiver(Sun Devil,Vltor,LaRue and POF)

GB1

Entire Thread
Title	Posted By	Posted
Forged, Cast, or Milled?	hekin	10/01/07
Re: Forged, Cast, or Milled?	dogcatcher223	10/01/07
Re: Forged, Cast, or Milled?	hekin	10/01/07
Re: Forged, Cast, or Milled?	lewis perkins	10/01/07
Re: Forged, Cast, or Milled?	Fjold	10/03/07
Re: Forged, Cast, or Milled?	Navarro	10/04/07
Re: Forged, Cast, or Milled?	5Rrifling	10/04/07
Re: Forged, Cast, or Milled?	Mannlicher	10/04/07
Re: Forged, Cast, or Milled?	rost495	10/04/07
Re: Forged, Cast, or Milled?	toltecgriz	10/04/07
Re: Forged, Cast, or Milled?	Jeff_O	10/04/07
Re: Forged, Cast, or Milled?	rost495	10/04/07
Re: Forged, Cast, or Milled?	Fjold	10/04/07
Re: Forged, Cast, or Milled?	Jeff_O	10/05/07
Re: Forged, Cast, or Milled?	Fjold	10/06/07
Re: Forged, Cast, or Milled?	Dtech	10/05/07
Re: Forged, Cast, or Milled?	5Rrifling	10/05/07
Re: Forged, Cast, or Milled?	rost495	10/05/07
Re: Forged, Cast, or Milled?	Dtech	10/06/07
Re: Forged, Cast, or Milled?	5Rrifling	10/06/07
Re: Forged, Cast, or Milled?	Dtech	10/06/07
Re: Forged, Cast, or Milled?	rost495	10/06/07
Re: Forged, Cast, or Milled?	Dtech	10/06/07
Re: Forged, Cast, or Milled?	Hound_va	10/06/07
Re: Forged, Cast, or Milled?	Planemech	10/06/07
Re: Forged, Cast, or Milled?	Hound_va	10/06/07
Re: Forged, Cast, or Milled?	Planemech	10/05/07
Re: Forged, Cast, or Milled?	rost495	10/05/07
Re: Forged, Cast, or Milled?	Planemech	10/05/07
Re: Forged, Cast, or Milled?	blinddog1	10/06/07
Re: Forged, Cast, or Milled?	Hound_va	10/06/07
Re: Forged, Cast, or Milled?	5Rrifling	10/08/07
Re: Forged, Cast, or Milled?	Dtech	10/08/07
Re: Forged, Cast, or Milled?	Planemech	10/08/07
Re: Forged, Cast, or Milled?	bobbyjack	10/23/07
Re: Forged, Cast, or Milled?	Gonehuntinnow	10/23/07
Re: Forged, Cast, or Milled?	Dtech	10/24/07
Re: Forged, Cast, or Milled?	rost495	10/24/07
Re: Forged, Cast, or Milled?	Dtech	10/25/07
Re: Forged, Cast, or Milled?	rost495	10/25/07
Re: Forged, Cast, or Milled?	Hound_va	10/25/07
Re: Forged, Cast, or Milled?	Gonehuntinnow	10/25/07
Re: Forged, Cast, or Milled?	Dtech	10/25/07
Re: Forged, Cast, or Milled?	Gonehuntinnow	10/26/07
Re: Forged, Cast, or Milled?	Dtech	10/26/07
Re: Forged, Cast, or Milled?	Hound_va	10/27/07
Re: Forged, Cast, or Milled?	Gonehuntinnow	10/28/07
Re: Forged, Cast, or Milled?	Dtech	10/28/07
Re: Forged, Cast, or Milled?	toltecgriz	10/29/07
Re: Forged, Cast, or Milled?	Dtech	10/29/07
Re: Forged, Cast, or Milled?	toltecgriz	10/29/07
Re: Forged, Cast, or Milled?	Gonehuntinnow	10/30/07
Re: Forged, Cast, or Milled?	Nebraska	10/30/07
Re: Forged, Cast, or Milled?	Dtech	10/30/07
Re: Forged, Cast, or Milled?	Gonehuntinnow	10/31/07
Re: Forged, Cast, or Milled?	Dtech	10/31/07
Re: Forged, Cast, or Milled?	Gonehuntinnow	11/01/07
Re: Forged, Cast, or Milled?	rost495	11/02/07
Re: Forged, Cast, or Milled?	toltecgriz	11/02/07
Re: Forged, Cast, or Milled?	Rusky	11/02/07
Re: Forged, Cast, or Milled?	Dtech	11/02/07
Re: Forged, Cast, or Milled?	Gonehuntinnow	11/02/07
Re: Forged, Cast, or Milled?	Jeff_O	11/02/07
Re: Forged, Cast, or Milled?	rost495	11/02/07
Re: Forged, Cast, or Milled?	Dtech	11/02/07
Re: Forged, Cast, or Milled?	Jeff_O	11/02/07
Re: Forged, Cast, or Milled?	Dtech	11/02/07
Re: Forged, Cast, or Milled?	rost495	11/02/07
Re: Forged, Cast, or Milled?	Scott_Thornley	11/02/07
Re: Forged, Cast, or Milled?	RickyD	11/02/07
Re: Forged, Cast, or Milled?	Dtech	11/02/07
Re: Forged, Cast, or Milled?	toltecgriz	11/02/07
Re: Forged, Cast, or Milled?	Gonehuntinnow	11/06/07
Re: Forged, Cast, or Milled?	rost495	11/06/07
Re: Forged, Cast, or Milled?	Scott_Thornley	11/07/07
Re: Forged, Cast, or Milled?	Gonehuntinnow	11/07/07
Re: Forged, Cast, or Milled?	Jeff_O	11/07/07
Re: Forged, Cast, or Milled?	RickyD	11/07/07
Re: Forged, Cast, or Milled?	rost495	11/07/07
Re: Forged, Cast, or Milled?	Scott_Thornley	11/07/07
Re: Forged, Cast, or Milled?	Hound_va	10/05/07
Re: Forged, Cast, or Milled?	Jeff_O	10/05/07
Re: Forged, Cast, or Milled?	Planemech	10/04/07
Re: Forged, Cast, or Milled?	Gene L	10/04/07

Moderated by RickBin

Link Copied to Clipboard

AX24

227 members (10gaugemag, 2ndwind, 300_savage, 222ND, 17CalFan, 257wthbylover, 26 invisible), 17,725 guests, and 1,180 robots.

Key: Admin, Global Mod, Mod

May
S	M	T	W	T	F	S
			1	2	3	4
5	6	7	8	9	10	11
12	13	14	15	16	17	18
19	20	21	22	23	24	25
26	27	28	29	30	31

Forum Statistics

Forums81

Topics1,194,995

Posts18,540,232

Members74,053

Most Online21,066

Responsive Width:

PHP: 7.3.33 Page Time: 0.193s Queries: 17 (0.007s) Memory: 0.9861 MB (Peak: 1.0166 MB) Data Comp: Zlib Server Time: 2024-05-27 05:31:32 UTC
Valid HTML 5 and Valid CSS