Got myself a new Rugerlin.
Installed Midwest Rail, Warne Maxima rings, Leupold 2.5-8x36 VX3i CDS.
Added a Wild West Happy trigger (3.3#).
Started with Hornady gummy bullets. Decent accuracy but literally exploding on steel into shards.
1st shot stripped the paint off and threw shrapnel 3' onto a shootnsee target.
Switched over to Federal Fusions. Really good accuracy, 1.25-1.5 5 shot at 100 from the bench.
A real baby doll to shoot. Recoil is half my 376 steyr.
Insides are very very well Machined, tolerances are super tight.
Next door neighbor has a special kid 13 who I'll slip a pouch of hubba Bubba to and let him work the action for a few hours nonstop. Should smooth it up a good bit.
Cocking the hammer and pulling the trigger repeatedly without the hammer making contact will lessen the trigger pull (eventually) if you don't want to polish the sear or add the Wild West trigger.
If your trigger is less than 4#...never mind.
