off the postal scale....
1#15oz remmy short CM. bolt complete. with lug, trigger and follower/spring.
3.2oz adl t/g (alloy) screws and box
3.8oz bdl t/g with screw and saum box (i didn't have a reg bdl box and remember that the saum boxes have the entire sides cut out)
my spare long was shipped last week and i ain't breakin' the 7 down
the contour on the 7 barrel is sick. and dont forget the callahan f/p ass.... the stock has not been bedded and wears no paint. i am really wanting to slab the action sides to see how far i can go. i am milling the bolt for more weight loss for sure. doubt i will flute it though...
i know the 7's aren't even close in popularity to the 700s but they should be. if weight is a concern a youth model wearing a bansner would be very close to 5# if not under. now that is a 20" tube but big deal.. if a 22" is perfect for a 06' case in a mountain rig the 20 will do absolutely ok in an 08' dress....
FWIW
woofer
