Pac-Nor did work, bedded forend directly w/glass bedding epoxy- I know most say do something else.....but the gunsmith had reports of a 308 he did and IIRC, sounds crazy, said the owner claimed like inch groups at 500 yds/or meters, maybe larger but not much, it sounded almost too good.....well, I told him do whatever he did to his, to mine. Bottom line, it worked, good barrel and trigger.....falling blocks can do well. Used a TC contender 1 pc base reversed on gun, made by Burris so windage adj. was in front vs rear. Sure a good bolt done right will best it, but the gun shot .498 at 330 yds for one 3 shot group, and ANY gun in my book to do that ONCE must be either REALLY lucky-gun and shooter, or a good shooting gun, a coincidentally properly flinching shooter-ha....yes luck involved......gun however seemed to do give take half MOA when I did my part.
Doug thanks, and Warren, MI is the town I am coming to Thurs. near Detroit. Do you know Grasshopper in MI? He frequents CF.
