BC30cal,
Thanks for posting this, I've got a Mark X in 7X57, IIRC it goes 8lb - 1 oz bare except weaver bases, if I keep it I definetly wan't to put it on a diet.
"The Decelerator added just over 5oz." Dwayne
MPI stocks (in Portland, OR) carrys (at least they used to) a pachmayr decelerator pad that had no steel in it, which you don't need if you are gluing (superglue) the pad to the stock (vs screwing it on).
You only lose a little over an ounce, so I wouldn't bother unless putting one on anyway, priced about the same.
Also there is the flip flop pad, which I haven't tried yet, so can't comment on the weight savings/functionality.
Steelhead or anyone else,
What do the HVA small ring actions weigh vs the large ring Mauser action? I saw a HVA model 51L{think this was the model #} (J.C.Higgins 30-06) that the owner CLAIMED weighed about? 6 pounds ...in a wood stock (no ammo or sling). Even though the bottom metal was aluminum, the stock rather trim and the action a small ring...I find that rather hard to believe!
Jerry
Last edited by jerrywoodswalker; 01/09/10.