PatB,
I too have been working with my 6.5x47 and Rel 17; 140 grainers to be specific.
Ran a little test just the other day. I'm having a Lt weight hunting rifle built by Chris Matthews of Longshot Rifles
http://www.longshotriflesllc.com/ , possibly in 6.5x47 Lapua or 260 Rem AI and wanted to see what a 140 gr bullet with Rel 17 would do. So, I took my tactical rifle, also built by Chris, and ran a pressure ladder with it.
Surgeon 591 short action
Krieger 26" 1:8.5 twist, SS, MTU contour
1.5 AICS stock
NF NXS 5.5-22x50 w/ NP-R1 reticle
Shilen 2lb trigger
6.5x47 Lapua brass w/ 5x firings
Berger 140 VLD Hunting
Nosler 140 Accubond
37 gr to 43 gr in .5 gr increments (42.5 gr w/ Accubond due to mucho compression)
CCI 450 primer
Throat started life @ .105" long but after 700+ rounds is now .161" long.
Temp 57 deg F
Baro 24.6
Chrono = CED M2 set 15' from muzzle
140 VLD's were seated .010" into the lands with OAL being 2.797".
140 Accubond's were seated @ the lands with OAL being 2.698". Had to turn down my Redding comp seater about .005" for each successive round after 39.5 gr.
37 2521
37.5 2533
38 2587
38.5 2614
39 2647
39.5 2682
40 2707
40.5 2770
41 2814 ? ejector mark
41.5 2863 Light ejector mark
42 2910 Light ejector mark
42.5 2922 ejector mark
43 2962 ejector mark & sticky bolt lift
Pressure ladder test for Rel 17
Nosler 140 Accubond
37 2513
37.5 2537
38 2569
38.5 2612
39 2634
39.5 2682
40 2716 ?ejector mark
40.5 2760
41 2770
41.5 2834 Lt ejector mark
42 2863 ejector mark
42.5 2910 ejector mark
I was pleasantly surprised @ the vel obtained in the little x47mm case with Rel 17. I think I'll hunt with it instead of going 260 Rem AI.
My new hunting rifle will be, Pierce, Broughton #3.1/26", Mc Rem Sporter Edge fill, Rifle Basix, NF 2.5-10x32 w/ NP-R2.
Enjoy!
Alan
