Yes, The model 95. As I mentioned earlier in this thread, pulling the stock off and inspecting the barrel marks underneath might provide more answers than questions. What I'm wondering is if a errant 95 barrel somehow made its way into the mdl 54 barrel bins and then eventually on to a mdl 70. Most of the odd caliber 70's were made up from left over 54 barrels. It would seem unlikley that a barrel would go that far through the machining process without being noticed though, especially since the extractor cut would have to be made on a naked barrel to fit it up to a bolt rifle and the finished rifle would have to be proofed. Another possibility is that the rifle was a back door rifle made by one of the employees from parts, another reason there are some real oddball chamberings out there.
