Here is the info about the 338 Win and the 257 Roberts. 338 Win mag Winchester brass Federal GM215M primers Reloder 19....73 grains 250 grain Partitions 27 inches.....2806 fps 26 inches.....2787 fps 25 inches.....2761 fps 24 inches.....2743 fps 23 inches.....2716 fps 22 inches.....2697 fps 21 inches.....2676 fps 20 inches.....2656 fps 150 fps from 27 inches to 21 inches
257 Roberts Federal GM210M primers Remington brass H-4350....45 grains 120 grain Partitions 27 inches.....2860 fps 26 inches.....2834 fps 26 inches.....2815 fps 25 inches.....2815 fps 24 inches.....2798 fps 23 inches.....2775 fps 22 inches.....2760 fps 21 inches.....2739 fps 20 inches.....2717 fps 143 fps from 27 inches to 20 inches I want to test this on the next 450 Marlin I build and on a 222 Remington. If I get the same results with those, in my mind the test is over. I think this will be enough data to support the findings. Are there any folks out there who have a degree in this sort of thing ? Maybe explain how many data points would be needed to be able to say this would work with the majority of calibers ? Someone with experience in statistical(spell check) quality control ? Charlie
The data and opinions contained in these posts are the results of experiences with my equipment. NO CONCLUSIONS SHOULD BE DRAWN FROM ANY DATA PRESENTED, DO NOT, UNDER ANY CIRCUMSTANCES, ATTEMPT TO REPLICATE THESE RESULTSj
|