|
Joined: Jan 2012
Posts: 1,114
Campfire Regular
|
OP
Campfire Regular
Joined: Jan 2012
Posts: 1,114 |
What do you guys think is the best glue to use on a stock crack? I have heard super type glue or epoxy or wood glue. What do you find to be the best.........
|
|
|
|
Joined: Nov 2005
Posts: 23,101
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2005
Posts: 23,101 |
Epoxy, hands down. Higher bonding strength than yellow glue, and more reliable over the long haul than CN (super) glues.
"You can lead a man to logic, but you cannot make him think." Joe Harz "Always certain, often right." Keith McCafferty
|
|
|
|
Joined: Oct 2011
Posts: 623
Campfire Regular
|
Campfire Regular
Joined: Oct 2011
Posts: 623 |
|
|
|
|
Joined: Nov 2005
Posts: 23,101
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2005
Posts: 23,101 |
Which is nothing more nor less than epoxy.
"You can lead a man to logic, but you cannot make him think." Joe Harz "Always certain, often right." Keith McCafferty
|
|
|
|
Joined: Feb 2001
Posts: 50,634
Campfire Kahuna
|
Campfire Kahuna
Joined: Feb 2001
Posts: 50,634 |
Wax the finished areas around the crack to make cleanup easier. Then warm the stock. You want it as hot as reasonably possible and as deep a heat soak as you can get. If there is access to the crack from inside (not on the finished surface) drill some tiny holes along the crack.
Apply slow-curing epoxy, well-mixed, all along the Crack.
Wrap with saran wrap over the glue and the whole stock. Try for air-tight.
As the stock cools it will suck the epoxy right into the crack.
Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
|
|
|
|
Joined: Mar 2004
Posts: 6,065
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2004
Posts: 6,065 |
Thanks for that Art. Have an old barometer oak back that is cracked and was wondering how to get the epoxy in there...
Do you sand the excess off?
Defend the Constitution
|
|
|
|
Joined: Feb 2001
Posts: 50,634
Campfire Kahuna
|
Campfire Kahuna
Joined: Feb 2001
Posts: 50,634 |
Thanks for that Art. Have an old barometer oak back that is cracked and was wondering how to get the epoxy in there...
Do you sand the excess off? The wax on the surface will let you pop the cured epoxy off in flakes as long as the surface is fairly smooth. Virtually no sandpaper needed. Red Oaks work better than whites, but either will suck the glue into a crack.
Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
|
|
|
|
Joined: Mar 2004
Posts: 6,065
Campfire Tracker
|
Campfire Tracker
Joined: Mar 2004
Posts: 6,065 |
Thanks Art--appreciated.
It's 19th century English...so not sure--just dry oak...:)
Defend the Constitution
|
|
|
|
Joined: Jan 2012
Posts: 1,114
Campfire Regular
|
OP
Campfire Regular
Joined: Jan 2012
Posts: 1,114 |
Cant thank you guys enough Im going to use epoxy and heat.......with wax.
|
|
|
|
Joined: Nov 2005
Posts: 23,101
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2005
Posts: 23,101 |
Just be careful not to get any wax down in the crack.
"You can lead a man to logic, but you cannot make him think." Joe Harz "Always certain, often right." Keith McCafferty
|
|
|
|
Joined: Feb 2001
Posts: 50,634
Campfire Kahuna
|
Campfire Kahuna
Joined: Feb 2001
Posts: 50,634 |
Yup, waxed crack can be a bad thing... or a good thing... depending...
Mark Begich, Joaquin Jackson, and Heller resistance... Three huge reasons to worry about the NRA.
|
|
|
|
Joined: Sep 2009
Posts: 7,296
Campfire Tracker
|
Campfire Tracker
Joined: Sep 2009
Posts: 7,296 |
Yup, waxed crack can be a bad thing... or a good thing... depending... Can't argue with that logic. But back on topic I recently went to a boat shop to get some epoxy that was recommended to me on this forum for fixing cracked stocks. Its called West Systems 100, I think. Anyway the shop told be they'd be happy to sell me a barrel of the stuff because they didn't deal in small quantities. They did tell me something about epoxies and glues that I didn't know. Glues like to be clamped tight and epoxies don't. In other words, epoxies work best when you have a gap to fill in your crack. And on that note I'll turn this thread back over to the line of humor that got me to write this response.
Last edited by S99VG; 04/19/17.
"The universal aptitude for ineptitude makes any human accomplishment an incredible miracle." John Stapp - "Stapp's Law" "Klaatu barada nikto"
|
|
|
|
Joined: May 2005
Posts: 16,554
Campfire Ranger
|
Campfire Ranger
Joined: May 2005
Posts: 16,554 |
Which is why if I have access to the back of a crack I open up the back of the crack with the dreaded Dremel before applying epoxy. I use the smallest burr, don't need much width. Depth at your discretion - careful.
The key elements in human thinking are not numbers but labels of fuzzy sets. -- L. Zadeh
Which explains a lot.
|
|
|
|
Joined: Nov 2005
Posts: 23,101
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2005
Posts: 23,101 |
Yup, waxed crack can be a bad thing... or a good thing... depending... Can't argue with that logic. But back on topic I recently went to a boat shop to get some epoxy that was recommended to me on this forum for fixing cracked stocks. Its called West Systems 100, I think. Anyway the shop told be they'd be happy to sell me a barrel of the stuff because they didn't deal in small quantities. They did tell me something about epoxies and glues that I didn't know. Glues like to be clamped tight and epoxies don't. In other words, epoxies work best when you have a gap to fill in your crack. And on that note I'll turn this thread back over to the line of humor that got me to write this response. That's one boat shop I wouldn't take my boat to. (Speaking as someone who spent 20 years as a yacht carpenter.) I can't tell you how many drums of West System we went through, or how many tightly clamped joints I assembled with it. You can get West System Repair Kits for a few bucks with enough resin, hardener, and coloidal silica in it to do a dozen gun stock cracks.
"You can lead a man to logic, but you cannot make him think." Joe Harz "Always certain, often right." Keith McCafferty
|
|
|
|
Joined: Jan 2001
Posts: 7,988 Likes: 3
Campfire Outfitter
|
Campfire Outfitter
Joined: Jan 2001
Posts: 7,988 Likes: 3 |
Been using West System for close to 25 years now on varying projects and always buy it in relatively small quantities. Look it up on the web and buy it in any quantity you want. I usually buy the smallest cans that will take a metering pump. Makes life a lot easier.
Bob
Never underestimate your ability to overestimate your ability.
|
|
|
|
Joined: May 2005
Posts: 16,554
Campfire Ranger
|
Campfire Ranger
Joined: May 2005
Posts: 16,554 |
gnoahhh,
A lot of places say clamp not too tightly, bet you can find that on West's site. Epoxy excels at gap filling where, say, resorcinol does not tolerate gaps at all. So with epoxy there's no down side to light clamping. Potential down side to heavy clamping is a starved joint.
Now not arguing with success, if you get a fully wetted joint clamp away. The big airframe mechanic's book the FAA put out recommends light clamping with epoxy so that's what I do.
The key elements in human thinking are not numbers but labels of fuzzy sets. -- L. Zadeh
Which explains a lot.
|
|
|
|
Joined: May 2005
Posts: 16,554
Campfire Ranger
|
Campfire Ranger
Joined: May 2005
Posts: 16,554 |
BTW, if you check the data sheets for the better brands of hardware store epoxy like Devcon they're stronger than the wood. Have had disappointing results with the fast set stuff though it's better than it used to be. Can't go wrong with West though.
The key elements in human thinking are not numbers but labels of fuzzy sets. -- L. Zadeh
Which explains a lot.
|
|
|
|
Joined: Oct 2011
Posts: 623
Campfire Regular
|
Campfire Regular
Joined: Oct 2011
Posts: 623 |
Which is nothing more nor less than epoxy. Duh No Shirt Sherlock! Dribble back down the sewer line.
|
|
|
|
Joined: Jan 2012
Posts: 1,114
Campfire Regular
|
OP
Campfire Regular
Joined: Jan 2012
Posts: 1,114 |
Thanks nighthawk Ill be sure to use regular epoxy not fast set.
|
|
|
|
Joined: Nov 2005
Posts: 23,101
Campfire Ranger
|
Campfire Ranger
Joined: Nov 2005
Posts: 23,101 |
Which is nothing more nor less than epoxy. Duh No Shirt Sherlock! Dribble back down the sewer line. Comment not intended for veteran smartasses, rather for those who are strangers to the world of epoxy and who think Brownell's is the answer for everything related to gun repair.
"You can lead a man to logic, but you cannot make him think." Joe Harz "Always certain, often right." Keith McCafferty
|
|
|
|
587 members (10gaugemag, 10Glocks, 1badf350, 1936M71, 12344mag, 64 invisible),
2,457
guests, and
1,402
robots. |
Key:
Admin,
Global Mod,
Mod
|
|
Forums81
Topics1,192,195
Posts18,485,050
Members73,966
|
Most Online11,491 Jul 7th, 2023
|
|
|
|