Home Forums Lever Action Central Marlin 336 Lever Actions Feeding Issue Again

I posted earlier regarding the feeding issue with my recently acquired 70's vintage 35 Rem. The carrier is hanging up on the loading spring/gate when trying to load a round in the chamber. Here is a shot of the gate looking down through the bottom of the receiver.



And one of the gate alone.



Does all look OK?

gate is bent too much........rebend ? replace ? new will need fitting.......

do not over tighten gate screw unless you have spare.........blue loc tite........

Midway has good selection of Marlin parts...or Marlin

https://www.midwayusa.com/product/1...in-336-30-30-winchester-35-remington-444

Appreciated. My thought as well. I bent it and will see how it goes tomorrow.