Home Forums Hunting & Shooting Hunting Rifles Mannlicher Stocked rifles- show em!

Nice Mannlicher Stocked rifles!
I have my Lipsey's Ruger RSI S.S. 30-06 My Wife
bought me for X-mas a few years ago that
I sent to Hired Gun here for Cerakote and Micro-Slick
My favorite Tree Stand Shooting House rifle
for L.A.(Lower Alabama)

6.5 MS

I need to get it out and shoot it .

There is a little pin holding the stock together.

Edit: I didn’t know what it was and the brain trust here at the fire here educated me .

Almost forgot this 7x57:

Just shot my Ruger RSI today.

This thread was perhaps the ultimate rifle porn.

Youper,

I agree! My absolute favorite stock configuration for the last 48 years! Terry

My biggest thing is this should be an Iron sighted only rifle. No scope. I'm ok with a peep sight.

My fully custom Ruger No.1 in the International pattern.

6.5x47 Lapua, Kahles 2-7 and nice mineralised English Walnut fitted with steel buttplate and gripcap.

I also have a Husky in 30/06 and a mannlicher length piece of Black Walnut Fiddleback that I'm working on in slow time.

Nicely done, Adam

Fiddleback looks the best on a full-stock, to me

Mannlicher stocked Martini 30 WCF














ya!


GWB

CZ 550 FS, 308 Win.





ya!


GWB

Top: Merkel k3 Jagd Stutzen 308 Win.


Bottom, Merkel K1 Jagd Stutzen, 7mm-08 Rem

ya!


GWB

Will this one work?

It works

Almost need a wide angle lens for that rascal.

Yes, it is rather difficult in the brush.

Husqvarna 456 in 30-06

Guess I can't post a pic from Imgur. ?? Picture attached

It's the rifle I have listed in classifieds.

Kent

I admit a fondness for Mannlicher stocks, and I have two. One is on a tang-safety blued/walnut Ruger M77 RSI in 250 Savage. Like one of the other rifles described here, it puts the first bullet pretty much exactly where the crosshairs are and the rest kind of go wild in a 2" group. It has a Leupold Vari-X III 1.5-5 on it. Don't know if the group size matters; so far, my son or I just fire one shot and something dies.

The other is on a Remington Custom Shop Model 7 in a laminated brown stock. It's a 7mm-08 with a 20" barrel and shoots several factory loads into the same 1.5" group interchangeably. If I stick with one load, it'll stay under an inch. It wears a Leupold VX3 2.5-8 with the B&C reticle. Glue weighs more than wood, so the laminated stock is heavy for its size. It is pretty slender in the fore-end and also in the pistol grip, so it's not overly heavy. One of these days I intend to get out and see what it does to critters!